How to use high-temperature coatings, paints and ink products:
High-temperature coatings, paints and ink products and traditional coatings, paints and ink products, after the painted/painted/printed workpieces are completely pre-treated, there is no major use of processes or methods such as spraying, brushing, roller coating, screen printing and roller printing. Difference; only the curing methods and methods are different. Traditional coatings, paints and inks use room temperature self-crosslinking/reaction curing, heating to 60~180 degrees Celsius curing and AB two-component reaction curing, etc.; and high temperature Coatings, paints and ink products need to absorb enough heat and a certain melting range process to achieve. Usually a tunnel furnace is used, and the process temperature is set at 480 to 700 degrees Celsius to melt and solidify.
The application of low-temperature melting glass powder in high-temperature coatings, paints and ink products should be designed by the laboratory after the small test formula and process test pass. Large-scale production is executed in strict accordance with the established formula and fine-tuning of the process. There are 2 types of water-based system and oil-based system under the design of large formula. Adding method: first add water or solvent, then add low-temperature melting glass powder, pigment, anti-settling agent and a small amount of low-carbon and high-viscosity resin, and disperse at high speed with dispersing equipment. Products (if necessary, it is better to use multi-roll equipment or sanding equipment to produce).