floating dredge pipe and floating oil hose
floating dredge pipe and floating oil hose
In general , Flexible floating dredge pipe and floating oil hose is essentially a tube,for conveying liquids media,that is reinforced and covered in such a way that floating hose for derdging can survive in offshore enviroment.
It consists out of an inner lining adjusted to the specific requirement of transported media.Wear indicator layers can be implemented in the hoses which transport abrasive media.A textile reinforcement of high tensile strength will control the pressure resistance of the hose as well as the tensile strength.
Where as the outer cover is built up by a rubber compound highly resistant against weathering, UV lights and Ozone.
On special request the outer cover can be built with oil resistant materials.
Flexible floating dredge pipe and hose pipe with end fittings are available in a wide variety which are selected on duty requirements.
1.Discharge Hoses
2.Suction Hoses
3.Floating Hoses
Flexible floating dredge pipe and hose pipe for Dredger
1. Flexible floating dredge pipe and hose pipe for dredger with flange end
Application: Used for port, dock, seawater, silt, sand ,discharge flood etc.
Characteristics: Flexible, Anti-waves, Wear-resistance, Weather-resistance, Aging-resistance,
seawater resistance
Temperature: From -20 Degrees Celsius To 80 Degrees Celsius.
Guarantee period:1 year or longer
Structure:
Internal rubber layer: NR, SBR,BR
Reinforcement layer: high tensile textile braided or tire cord or steel wire spiral
External rubber layer: Black SBR and CR blend rubber with orange attention line.
W.P: 10-30 bar
| Inside Diameter | Working Presure | Vacuum Presure | Adhesive Strength | Abrasion value | Length | |||
| mm | inch | Mpa | bar | Kpa | bar | KN/m | cm3 | m |
| 304 | 12" | 1.5 | 15 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-2.5 |
| 400 | 16" | 1.5 | 15 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-2.5 |
| 500 | 20" | 1.5 | 15 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-2.5 |
| 600 | 24" | 1.2 | 12 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-2.5 |
| 800 | 32" | 1.2 | 12 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-2.5 |
| 900 | 36" | 1.2 | 12 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-2.5 |
| 1000 | 40" | 1.2 | 12 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-2.5 |
Any other parameters can by as your order
2. Flexible Din Rubber Suction dredge pipe and hose pipe for dredger with flange end
Structure:
Internal rubber layer: NR, SBR,BR
Reinforcement layer: high tensile textile braided or tire cord or steel wire spiral
External rubber layer: Black SBR and CR blend rubber with orange attention line.
W.P: 10-30 bar
3. Flexible Marine Self-Floating dredge pipe and hose pipe with flange end
- Wear indicating layer
- Independent foam floating casing preventing water absorption
- Outer layer with excellent resistance of abrasion UV,aging and corrosive enviroments.
- Easy installation and less maintenance.
- Customized steel flange are available.
Inside Diameter | Working Pressure | Burst pressure | Vacuum Pressure | Adhesive Strength | Abrasion value | Length | |||||
mm | inch | Mpa | bar | Mpa | bar | Kpa | bar | KN/m | cm3 | ft | m |
254 | 10 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
304 | 12 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
350 | 14 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
400 | 16 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
450 | 18 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
500 | 20 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
550 | 22 | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
600 | 24 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
800 | 32 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
850 | 34 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
900 | 36 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
1000 | 40 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
1200 | 48 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
1300 | 52 | 2.0 | 20 | 6.0 | 60 | 80 | 0.8 | ≥4 | ≤0.4 | 38.7 | 11.8 |
NOTE: Other parameters are by your requirements. | |||||||||||
Flexible Marine Self-Floating dredging hose with flange end
Flexible Marine Self-Floating dredging pipe with flange end
Flexible floating dredge pipe and hose pipe with flange end
Packaging:braided stripes in rolls or as the customer's request
Shipping PORT: Tianjin port
Trade partners
Over the years, ZEBUNG company efforts on making "ZEBUNG" as an internationally recognized brand,and we have established more good relationship with our customers and have friendly communication with each other.
About us:
Heibei Jingxian zebung Rubber Technology ,Co,.Ltd is a member of the association council of China Rubber Industry Association,a memberof Rubber hose (Sc1) of China Standard Organization and is also a key manufacturer of rubber hose with most comprehensive and large productivity in China.
The company is located in Jing xian developing zone,He bei Province,China is a professional manufacturer of hydraulic rubber hose,oil hose, large diameter mud suction and dredge hose,offshore oil delivery floating hose,LPG hose,water hose, air hose, sandblasting hose,food hose ,beer hose, steam hose, and oil hose ,etc. All kinds of hoses made by zebung Rubber Technology Co., Ltd are widely used in engineering machinery,oil drilling,iron and steel smelting,coal mining,aviation, marine,ship building,port dredging project as well as chemical industry,etc.
The company has obtained ISO 9001:quality certification ,BV and CE certifications,LR certification as well as ECM certification .As a key supplier of Ali ba ba.,the company will continue to supply best varied rubber hoses to all customers at home and abroad ,to create excellent future with our customers together !
Braider machine for industrial hose:
Italy VP automatic equipment line :
We have two 61meters VP production line.
Question: What kind of payment your company accept?
Answer: T/T, L/C, West Union, Paypal etc
Question: How do you guarantee the quality?
Answer: We have strict quality management system thorough check products before packing .
Question: Can you send samples for testing?
Answer: Yes.We can provide free samples for testing.
MATERIAL HANDLING HOSE WIHT POLY COVER
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier