flexible metal corner tape/plastering corners metal corner tape 50mm*30m

Product Description:

This is a flexible corner tape made from a tough kraft paper, bonded to two galvanized steel strips that are treated with a rust-resistant coating.

This flex tape is used for taping plasterboard corners, it is suitable for any internal or external angle. Ideal for a variety of plasterboard taping applications including vaulted ceilings, ceilings and bay windows.

The tape forms a strong bead on corners of any angle.

Specifications:

Custom sizes and styles are available.

Width:50mm

Length:30m

Flexible metal tape-on corners ensure straight, strong corners at any angle on cathedral and drop ceilings, around bay windows, and in a variety of other applications.

Combining steel strength with superior bond of compound to paper, the corners are manufactured with two steel strips attached to a strong paper tape covering that provides excellent adhesion of joint compound, paint, and texture. They install easily and resist edge cracking and chipping, delivering corners that stay beautiful despite the stresses of normal building movement and everyday wear-and-tear.

The corners’ unique, nose coating on the paper minimizes scuffing and fuzzing when finishing and sanding. It applies with joint compound instead of nails, eliminating nail popping when the wood frame shrinks over time.

Normal Size: 50mm x 30m

Carton Size: 44x22x30cm

Application:

1. Provides straight, strong corners on any inside or outside angle resisting edge cracking and chipping

2. Ideal for use in a variety of drywall applications: internal or external corners which are 90 degrees or not 90 degrees, for manual application only.

For example: archways, curves, vaulted ceilings, coffered ceilings, bay windows, etc.,

Ideal for use in a variety of drywall applications including vaulted ceilings, coffered ceilings and bay window

4. Widely used in construction field

Company information:

Our products ensures straight, strong corners at any angle on cathedral and drop ceilings, around bay windows, and in a variety of other applications. Combining steel strength with superior bond of compound to paper, the corners are manufactured with two steel strips attached to a strong paper tape covering that provides excellent adhesion of joint compound, paint, and texture.

Easy installation that resists edge cracking and chipping, delivering corners that stay beautiful despite the stresses of normal building movement and everyday wear-and-tear.

Unique nose coating on the paper minimizes scuffing and fuzzing when finishing and sanding.

Applied with joint compound instead of nails, eliminating nail popping when the wood frame shrinks over time.

Instructions:

1. Cut easy metal corner tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to achieve. Apply generous coat of joint compound to a depth of 1/8", covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound.

2. Once the corner is embedded, remove excess compound with taping knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6"- 10" wide on each side of corner. When dry, sand lightly if needed. The wide, galvanized steel strips act as a guide to ensure straight, reinforced angles for both "inside" and "outside" corner needs.