Main tube type | Φ165×3.25 high tensile steel,hot dip galvanization |
Connecting flange thickness | 10mm |
Sprinkling tube diameter | 22mm |
Inlet pressure | 0.25~0.35Mpa |
End pressure | 0.15MPa |
Voltage | 380V,50HZ |
Min ground clearance | 2.6m |
Max ground clearance | 4.5m |
Sprinkler ground clearance | 1.2m |
sprinkler uniformity | ≥85% |
Max grade ability | 20% |
Tire type | 14.9×24-8Hot dip galvanized steel |
Wheel distance | 3.85m(center distance) |
Sprinkler | D3000 Low pressure nozzle |
Sprinkling diameter | 6m |
Controling tower box | France“Schneider”,Japan “Omron” Electrical components with safety protection function |
Motor and reducer | Miter gear box,waterproof motor,speed ratio 40:1 |
Wheel gear reducer | large torque,Worm gear deceleration on both ends of the shaft design,speed ratio 52:1 |
Main controling box | ①France“Schneider”,Japan “Omron” Electrical components ②Automatically adjust the speed ③Three-phase voltage balance control display ④urgency automatic stop and position display function ⑤The function of insurance against lightning ⑥Pensu processing box |
Positive and negative transfer function | yes |
Running lights | yes |
Synchronization protection function | yes |
Emergency synchronization protection function | yes |
Motor thermal protection function | yes |
Low or over voltage protection function | yes |
Lightning protection function | yes |
Downtime, position display function | yes |
Three-phase voltage monitor display function | yes |