Temperature: 10-30°C
Relative humidity: RH 30-70%;
Temperature change rate: △Tw15°C/ hour, or no condensation;
Vibration: no constant vibration (source);
Chemical environment: no volatile substances, no high corrosion substances
2. The surface of the raised floor is forbidden to be washed with water, and the mop that applies wring out is mopped, in case the surface of the raised floor is covered with peeling and the metal parts of the lower part are encrusted
3. Do not use hard thing (or sharp tools) to squeeze, impact, scratch, finish or apply plastic coating
4. When the raised floor is opened or installed, special panel lifter shall be used to handle and put gently, and no hard pry iron be used.
5. Corridor, entrance and the place with a lot of people, should avoid heavy load, otherwise easy to damage the floor.
6. For long-term heavy load, when a support point of a machine weight is large than floor bearing grade 1/3, should be in the floor corresponding parts with a column support, otherwise easy to cause the floor out of shape.
7. After the floor is paved, walking may produce sound, which is related to the floor and installation, not the performance of the floor itself.
8. Do not use heavy items that may damage the floor.
9. Do not transform the floor at will. Do not move the panel lifter while they are sucking the floor in case they fall off on the
way. when taking the floor, should wear gloves, otherwise easy to damage the hand, avoid sunshine direct irradiation, lest facing layer prematurely discoloration aging.
10. Please do not lay down gas and water pipes under the floor.