factory price egt thermocouple k type sensor with PID controller

factory price egt thermocouple k type sensor with PID controller

• EGT probe sheath material is Inconel which is extremely corrosion resistant and is made for high temperatures.
• The inner core cables are teflon insulated which is less prone to shorting and corrosion because it does not absorb moisture compared to fibreglass insulation.
• We can also make custom made EGT sensors to your specifications.
• This EGT gauge will read and display temperature accurately within +/- 1deg to temperatures up to 1300deg C.
• The EGT thermocouple probe has a exposed tip sensing junction with 250mses response time and comes with a 3 meter stainless steel braided cable and 1/8 NPT compression fitting.

TEMPERATURE GAUGE

POWER SUPPLY : 12Vdc
TEMPERATURE RANGE : -200 ~ 1300deg C for type K
INPUT TYPE : Type K
CONTROL OUTPUT : SSR 8VDC
DISPLAY  :  4 Digit
ALARM OUTPUT : Relay type 3A
SIZE ; 48mm X 24mm X 75mm
PANEL CUTOUT DIMENSION : 45 X 22mm
FITTING ; Snap type
INSTRUCTION MANUAL INCLUDED

AVAILABLE IN RED ,BLUE ,GREEN, WHITE  AND SO ON COLOR DISPLAY 

EGT PROBE
TYPE : K type
RANGE : 0-1000deg C
PROBE DIAMETER : 5mm(dia) x 80mm(L)
PROBE MATERIAL : INC0NEL600

RESPONSE TIME CONSTANT : 250milliseconds
JUNCTION :  Ungrounded exposed tip
CONNECTION ; Adjustable compression fitting stainless steel
THREAD SIZE : 1/8 NPT
CABLE : 3 meter long with stainless steel braiding with teflon coated inner core cable

Details of the EGT PROBE:

 Details of the temperature gauge:

1.  digital pid temperature controller Product Highlights

Thermocouple: T, R, J, B, S, K, E, Wre3-Wre25.

Thermo Resistor: Pt100, Cu50.

1 Relay output, 1 SSR controlled output.

Time proportional PID controlled output to either Relay or SSR

Three built-in algorithms that fit most control objects and various applications.

Temperature can be set to display in either Fahrenheit or Celsius degrees.

2.  digital pid temperature controller Specifications

Supply voltage: 12V AC or DC

Power consumption: < 2 Watts.

Sampling speed: 4/sec.

SSR activated voltage: open circuit: 10V; short circuit: 40mA.

Accuracy: 0.2% of full scale.

LED Display: Red, 0.28 inch

Out of range indication: “EEEE”.

Ambient temperature requirements: 0 to 50 C (32 to 122 F)

Humidity requirement: < 85% RH.

Relay Contact: 220VAC, 3A.

Controller dimensions: 48 x 24 x 75 (mm).

Opening for installation: 44 x 20 (mm)

3. Panel Illustration and Description

Figure 2

1 -- AL, Relay J1 Indicator.

2 -- Select next parameter / value increment.

3 -- Selection previous parameter / value decrement.

4 -- Digit select / Auto tuning.

5 -- Setting / Confirm.

6 -- Output, controlled output indicator. (AT) Blinking during auto-tuning process.

7 – Temperature reading, degrees F or degrees C (as chosen)