SBR rubber is durable and economical rubber that provides excellent abrasion resistance and can be used in a wide-range of industrial applications. Made from a blend of styrene and butadiene polymers, styrene butadiene (SBR) rubber exhibits similar properties to natural rubber.
SBR rubber sheeting is often used in place of natural rubber for many applications due to the significant cost savings. Compared to natural rubber, SBR rubber sheet provides enhanced resistance to abrasion, wear and water. It’s a non-oil resistant material that’s widely-used in the production of several rubber products.
Styrene Butadiene (SBR) rubber is a good selection when it comes to rubber gaskets and seals. Due to the good heat resistance and heat-aging qualities of SBR, it performs well in extreme temperatures. It is not recommended for use in applications involving exposure to ozone, strong acids, oils, greases, fats and most hydrocarbons.
Key Features
* Shore Hardness: 65° ± 5°.
* Temperature: -30°C up to +70°C.
* Reinforced with a single ply cloth, providing increased tensile strength over commercial rubber.
* Offers good abrasion resistance.
* General purpose rubber sheeting
Specification
* thickness: 0.5-50mm
* width: 0-3m
* length: any length, standard is 10-30m
* insertion is available such as 1ply/2ply/3ply/4ply
* surface: two sides smooth/one side smooth +one side textured/two sides textured
Technical datasheet
* Standard hardness: 65 +/- 5 (Shore A)
* Color: Red/black/green/white
* Temperature: -20 to + 80 degree
* Tensile Strength: 2-3mpa
* Elongation: 200 %
* Density: 1.5/1.6/1.7/1.8 g/cm3
