equipo de movimiento de arena peralatan pemindahan pasir sand moving equipment

Slurry Pump Jakarta  are innovative in the design of structure and hydraulic performance. Over-Flow components are made of abrasion resistant high-chromium alloy, with characteristics of high efficiency, energy saving, wear-resisting and reliable running etc. It is suitable to convey strong erosion slurry, slag or grout contained solid particles. The Slurry Pump Jakarta  are widely used in pumping sand, land reclamation, electric coal-ash and tailing in metallurgy industry, etc.

Structural diagram of Slurry Pump Jakarta

 Technical parameters of Slurry Pump Jakarta

The information in the table is not complete. Please click here to get more detailed data.

1.The high concentration Slurry Pump Jakarta have the excellent water performance, high efficient and low wear rate with the help of CAD design and CAE simulation.

2.Smooth flow channel, good anti-blocking performance, excellent cavitation performance.

3. Vice impeller seal, packing seal or the mechanical seal to ensure no slurry leakage. Reliable design can ensure the pump work with long time.

4. Adopt the thin oil lubrication metric bearings with reasonable set of lubrication. Cooling system to ensure that the bearings run at low temperature.

5. With special treatment, the Slurry Pump Jakarta can be used the corrosion working conditions like seawater ash ,seawater and salt spray.

6.Within the allowable pressure range, the Slurry Pump Jakarta can be used in multiple stages series connection .with allows maximum working pressure for 3.6Mpa.

Slurry Pump Jakarta adopt double-pump case structure and are extensively used to extract medium particles such as mud, fine sand, tailing slag then carry them out to long distance destination. OCEAN pump DS series Slurry Pump Jakarta are suitable for mud conveying, sewage treatment, marine suction, sand extraction, land reclamation and dock construction, etc. The type of Slurry Pump Jakarta can also be used in power plant, metallurgical transportation tailings, river dredging and other dredging industries. Our Slurry Pump Jakarta  have been widely used in various conditions such as dredging and embankment in the Yellow River Basin, dredging in the Yangtze River Basin, land reclamation along the coast and sludge treatment.

Because of the high head and high outlet pressure, the Slurry Pump Jakarta are often used as a booster pump. Some engineering projects require a long distance to transport the medium, and the ordinary sand pump can not reach the required head, so the project will require two or more sets of sand pumps working at the same time, but this will leads to increased costs and an increased failure rate. These slurry pump have a high head, so even a single pump can transport a long distance. Therefore, for transferring liquid from far away, customers mostly choose these Slurry Pump Jakarta  as booster pumps.

A client, Mr. Zhao of Wenling, had a river dredging project. He needed to suck and send the sand slurry sediment 2 km away from the river stacking point. His workers cleaned the rubbish of the river already. The river sand was mixed with mud but without large or fibrous medium. According to the total sand capacity requirements and the time limit of this project, our engineers calculated the necessary data for one model of the Slurry Pump Jakarta . The solid-liquid mixed flow is about 1000 cubic meters per hour. we finally chose the model DS300-75 of the Slurry Pump Jakarta for the pumping and delivery operation.

Since the motor noise of Slurry Pump Jakarta is small, it is more cost-effective to use electricity than the diesel engine. The customer actively proposed to use the motor drive. So we selected the 220kw motor according to the parameters of the Slurry Pump Jakarta . At the same time, in order to protect the motor and control the pump more conveniently in actual operation, we configured variable frequency control cabinet for the slurry pump. After sending the customer of the parameters of the program and related equipment, the customer communicated with us on the specific details.

After confirming that the plan is correct, according to the contract requirements, the customer pays the advance payment, and our company arranges the production task. Complete production tasks and deliver them to customers within the specified time. So far, the customer has reported that the Slurry Pump Jakarta  worked well and planed to continue to cooperate with us in the next project.

Slurry Pump Jakarta parameters

Flow: 1000 cubic meters / hour

Head: 48 meters

Power: 220KW

Pump model: DS300-75

Discharge pipe: 355mm PE pipe

As the professional sand pump and dredger designer, manufacturer and exporter, OCEAN Pump had been worked harder to become the leader to supply One Stop Sand Pumping Solutions to worldwide customers since 1997.  We have more than 30 talented sand pumping experts and strong teams responsible for product development, manufacturing, quality control, exporting, after sales service. We have our own manufacturing factory with professional technicians and advanced machines. By choosing OCEAN Pump, you choose a long term professional partner for your sand pumping business.

OCEAN Pump Factory is located in Taian City, the famous tourist city near the expressway from Beijing to Shanghai, Shandong Province, China. As the leading sand pump machine designer and manufacturer, OCEAN Pump has its own 15,000 square meters state-of-art manufacturing factory. In recent years, we had invested more than 700,000 dollars into our modern manufacturing factory to improve the basic production facilities , working conditions, employee salary and welfare, technical and teamwork training, etc.