Density: 42kg/m3
Color plate thickness: 0.5/0.6mm
Panels thickness: 50/75/100/120/150/200mm
We're one-stop refrigeration solution supplier, providing professional design, manufacturing, installation, testing and maintenance services. Not only we can provide high quality PU/PIR panels and XPS floor panels, but also we can provide complete refrigeration systems and all accessories parts. 10 years warranty, at least 20 years lifetime!
Density: 42kg/m3
Color plate thickness: 0.5/0.6mm
Panels thickness: 50/75/100/120/150/200mm
Type: XPS panels
Thickness: 50mm
Compressive strength: 350KPA
Automatic dock leveler
Automatic sectional overhead door
High quality dock sealing systems
Original new Bitzer semi hermetic compressor
Danfoss/Schneider/Emerson refrigeration parts
High efficiency condenser and evaporators
Suitable temperature range for different cold room/cold storage
Use nature/Suitable for | Tempreture range |
Processing room | 12~19C |
Fruit, vegetable, dry food | -5~+10C |
Medicine, cake, pastry, chemical material | 0C~-5C |
Ice storage room | -5~-10C |
Fish, meat storage | -18~-25C |
Deep freezer, low temperature storage, quick-freeze, blast freezer | -25C~-40C |
Panel for cold room
Panels thickness | Temperature difference inside and outside cold room | Suitable temperature for cold room |
75mm | 40℃ | -5~25℃ |
100mm | 50℃ | -15~25℃ |
150mm | 70℃ | -25~25℃ |
180mm | 80℃ | -35~25℃ |
200mm | 90℃ | -50~25℃ |
Customer info: This project is for an ice cream manufacturer & distributor. Ice cream inlet temperature is -22C and need strong cooling. Heavy loading shelving systems, with reach truck accesss.
Order info:
3x125HP Bitzer screw compressor rack, one compressor as back-up, water cooled condenser with cooling tower.
Cold room dimension 26x18x18meter with 2 chambers, 200mm PIR roof/wall panels, 4x50mm XPS floor panels
8 loading bays, so less leaking during the unloading from reefer container.
The height of room ceiling decides the maximum height of cold room. Small cold room we often suggest 2.3~2.8m. Big cold storage we suggest 3~5m.
No. The compressive strength of PU panel is smaller than 200kpa, too weak to suffer heavy forklift. So we suggest XPS floor, with 350kpa compressive strength.
Yes. We can appoint our engineer overseas. But you should provide accommodation, food and install equipment.
Some factors such as environment temperature, entering temperature, products quantity are objective, hard to be changed. But we can provide you with good insulation panels and high quality refrigeration units. These will reduce your daily power consumption.
Yes. Safer, less power consumption.
1) In peak period, you have large storage, then you can use all the small rooms. The food will not interact and better insulation.
2) In off-peak season, you have little storage, then you can only use one or two small cold rooms. It is better to save electricity.
Our factory can design and produce all kinds of condensing unit, compressor rack, condenser, evaporator, etc. All these years, we're agent of Bitzer compressor and Danfoss, better price, shorter production time, less quality troubles.
We're the only one manufacturer in China who has two continuous PIR automated lines, one from German, the other from Italy. Annual output up to 2,800,000 sqm panel, 10,000 units cold room doors. We can ensure our panels lifetime 20 years at least.
95% of the units are with standard plywood package. XQ series condensing unit, small evaporator and condensers are with carton package. Can be updated to plywood.
Each panel is well wrapped with plastic film respectively, For container shipping, dozen pieces is packed on one pallet. Very easy for container loading and unload. For LCL delivery, package can be updated to plywood package for better protection.