encoder feedback sine wave pmsm motor servo dc brushless motor 24v 48v 200w 400w 800w 1kw 2kw 3kw for self guided vehicle
Model: KY80AS0202-15
Product Description |
*High Torque to inertia ratio&up to 25000Nm/kgm² |
*Fast dynamic response, time constant <20ms |
*Wide speed adjusting&feedback up to 1000:1 |
*Steady speed precision up to 0.5% |
*High overload, 2N.m/30s, 3.5N.m/10s |
*Small volume and light weight |
*Silent, the lowest noise is only 45dB(A) |
*Protected with IP65, Class F insulation |
Specification of pmsm motor KY80AS0202-15 | |
Rated voltage | 24V |
Rated power | 200w |
Rated speed | 1500rpm |
Rated current | 9.4A |
Rated touque | 1.27N.m |
Peak Torque | 3.81N.m |
Line Resistance | 0.06Ω (20℃) |
Rotor Inductance | 0.28mH |
Torque Constant | 0.17N.m/A |
Back EMF Constant | 17.3V/Kr/min |
Rotor Inertia | 418kg.m2*10-6 |
Mechanical Time Constant | 0.56ms |
Electrical Time Constant | 0.5ms |
Weight | 2.2kg |
Number of poles | 5 pairs |
Incremental optical encoder | 2500ppr |
Brake | If need the brake, kindly advise |
Support | If you need any help on the 24v 48v brushless dc motor 200w 400w 500w 800w 1kw, kindly contact Nancy directly, Email address: sales(at)jnky.com |
Product Overview |
encoder feedback sine wave pmsm motor servo dc brushless motor 24v 48v 200w 400w 800w 1kw 2kw 3kw for self guided vehicle
Connect cable
Related products |
Model | Rated power/W | Rated volt/V | Rated speed/rpm | Rated Current/A | Rated Torque/N.m |
KY80AS0202-15 | 200W | 24V/48V | 1500rpm | 9.4A/4.7A | 1.27N.m |
KY80AS0204-15 | 400W | 24V/48V | 1500RPM | 21.3A/10.6A | 2.55N.m |
KY80AS0204-30 | 400W | 24V/48V | 3000RPM | 18.8A/9.4A | 1.27N.m |
KY110AS0405-15 | 500w | 24V/48V | 1500rpm | 28A/14A | 3.1N.m |
KY110AS0408-15 | 800w | 24V/48V | 1500rpm | 44A/22A | 5.0N.m |
KY110AS0410-15 | 1000w | 24V/48V | 1500rpm | 52A/28A | 6.3N.m |
KY110AS0412-25 | 1200w | 48V | 2500rpm | 33A | 4.5N.m |
KY110AS0415-15 | 1500w | 48V | 1500rpm | 37.5A | 9.5N.m |
KY110AS0415-30 | 1500w | 48V | 3000rpm | 37.5A | 4.7N.m |
KY110AS0420-25 | 2000w | 48V | 2500rpm | 55A | 7.6N.M |
KY130AS0430-15 | 3000W | 48V | 1500rpm | 73A | 19.1N.m |
We also have 48V 4KW bldc motor for your choice, link as below:
Matched gearbox |
We have right angle planetary gearbox, line planetary gearbox, worm gearbox, helical hypoid gearbox for the 24v dc brushless motor 200w 400w 500w 800w 1000w 1200w 1500w 2000w 3000w, when you need any help on that, kindly advise.
Matched Driver |
Product | Dual channel bldc controller for 24v 48v 200w 400w 500w 800w 1kw 1500w brushless servo motor |
Channel | Dual channel, can control 2 motors at same time, built in difference arithmetic Notice: we also have single channel controller for your choice, kindly don't worry. |
Voltage range | 10-55VDC |
Control signal | RS232, CAN open, PWM, RC, 0-2.5V-5V, 0-5V |
Current | 30A 50A 75A per channel |
Feedback | Hall sensor, 500ppr - 2500ppr optical incremental encoder |
Working mode | Open/Closed loop speed mode, closed loop position mode |
Software | Customer can modify the controller configuration themselves, we will provide you the software with the controller together. |
Support | If you need any help, please contact Nancy Ni, email address: sales(at)jnky.com |
Our Service |
We devote ourself to Research & Development, welcome Costom-made products, if you need some unusual products, let's have further communication.
encoder feedback sine wave pmsm motor servo dc brushless motor 24v 48v 200w 400w 800w 1kw 2kw 3kw for self guided vehicle.
FAQ |
1. Q: What are your main products?
A: We produce various kinds of bldc motor & controller.
2. Q: How long have you been in this field?
A: More than 15 years in this field.
3. Q: Do you have your own R&D team?
A: Yes. R&D is our core competitiveness, continuous innovation is just what we are seeking for all the time. Some of our engineers have more than 20years experience in the industry, and we also cooperate with colleges, scientific research institutions and large enterprises.
4. Q: How soon can you deliver the goods?
A: That depends on the exact model you order. For regular products, usually we will prepare some units in stock, we can deliver them within 3 working days.
5. Q: Can you make the product according to customer’s requirements?
A: Yes, welcome costom-made products.
6. Q: What is your payment term?
A: You can pay by TT, Paypal, Western Union.
Contract |
Thank you for your visiting, when you need further more information, kindly contact Nancy directly, the detail information will be provided for you within 1 hours.