electric water pump motor submersible pump single phase

◊ Products Introduction:         

    S series electric water pump motor cost is a kind of water conservancy machinery that the whole pump dipped into the medium and work under the water. With non-clog, winding, compact structure, small volume, wear resistance, corrosion resistance etc. The whole cabinet is made of stainless steel materials, corrosion resistance is strong, sophisticated materials, advanced structure, wide circulation way, sewage capability is strong. Suitable for conveying sewage containing alkali ingredients, such as building wastewater and chemical wastewater, food factory, water treatment and so on.  

     S series electric water pump motor cost can be mounted to the cutter blade device, directly tear type processing, where the water inlet at the bottom to the impeller discharge, the implementation never jam (general for environment contains weeds, fibers, granular, paper tape).

   Also, electric water pump motor cost can be mounted to the stirring wheel, water inlet at the bottom after mischief makers, again by the pump impeller discharge, the implementation of silt.

◊ Pump Structure Installation:

     S series electric water pump motor cost is mainly comprised of three parts: pump body, mechanical seals and motor.

     Pump body is at the lower part of sewage pump, and its structure is impeller and shell. Motor located at the upper part of the motor pump, which is the single phase or three-phase electric motor.

    Mechanical seals are located in middle and it is mounted on two ends of the rotor. Our mechanical seal has particularly an item letter of patent, the advantage of our seal is that it will never wear the main spindle of the rotor.

    "O" rings are applied in all static joints of the submersible pump. It's material is fluororubber which have a good performance on antiseep and corrosion resistance.

    Besides, our bearings are all using high grade bearing imported from Japan rather than inferior bearing.

◊ Operate Condition of S series electric water pump motor cost:

      1. S series electric water pump motor cost belong to submersible pump, so it must be satisfied the working condition of submerging into the water. 

      2. The trans medium's temperature shouldn't be higher than 40.

      3. Medium's pH level: 3~10(If beyond this range, please choose other types)

      4. The voltage is 380V(It must be used within the range of plus or minus 5%)

      5. Before you buy pumps, please inform detail informations including capacity, head,  caliber, power etc, so that we can advise you appropriate model.

         (Attention: do not choose the pump that the capacity is too large or the head too height, that may affect its working life.)

◊ Some parameters of  S series electric water pump motor cost:

1.No-clog:adopt unique single or double impeller structure, ensure that the sewage can passed easily.

2.Operate steadily: absolute concentricity of pump shaft and  excellent static and dynamic balance of the impeller ensure that the pump can operate steadily without any shake.

3.Low noise:the pump is operated with two low-noise bearing,so it can operate steadily and without noise except the motor sound.

4.Self-protection

5.Low failure rate

◊ Company Advantages:

1. Beijing Olympic believe Zhejiang Feili Pump

2. Fly out Asia, cover over 58 countries

3. 90% customers, no face to face, always get praise

4. Reply in time, solve in a day
5. Free accessories for worn parts

S series electric water pump motor cost is packed in standard plywood case:

1.Professional export packing, suitable for long distance shipping

2.Sturdy, strong and resistant to collide

 The accessories of  S series electric water pump motor cost:

We promise to: 

1).Offer our customers the lowest costs. 

2).Streamline the buying and paying processes. 

3).Deliver goods to our customers all over the world with speed and precision. 

4).Ensure the excellent quality of our products.

5).Should you have any question or requirement, pls feel free to contact us. Sincerely hope to build a long-term friendly cooperation relationship with you!!!

1)Q: Are you a factory or a trading company?

  A: Pump manufacturer.

2)Q: How about your quality?

  A: We arrange the prodcution quality according to customers' request.

3)Q: What are your payment terms?

  A: 30% payment bu T/T in advance, the rest when the goods finished.

4)Q: How about the packing of this model?

  A: Standard export wooden box.

5)Q: About customers response?

  A: Always become repeat customers.

6)Q: How about the Quality warranty 

  A: 12 months after receiving.