Brief Introduction
1.This machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.
2.This machine is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes and piles are good at quality.
3.The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.
Working Principle
After the pole mold is installed with certain quantity of reinforcing skeleton and concrete, the centrifugal spinning machine will drive the pole mold revolving from slow to fast. The concrete will adsorb tightly on the inner wall of steel mould after a certain time of bond with reinforcing bars under the centrifuge force. After sealed and cured, the concrete poles are formed.
Technical Parameters
Inside diameter of small end |
Wheel distance |
Length |
100 mm |
2000 mm |
6-7 m |
110 mm |
2000 mm |
6-7 m |
120 mm |
2000 mm |
6-8 m |
130 mm |
2000 mm |
6-8 m |
150 mm |
2000 mm |
6-10 m |
170 mm |
2000 mm |
6-12 m |
190 mm |
2000 mm |
7-12 m |
190 mm |
2000 mm |
15-18 m |
230 mm |
2000 mm |
6-9 m |
310 mm |
2000 mm |
6-9 m |
350 mm |
2000 mm |
6-9 m |
390 mm |
2000 mm |
6-9 m |
Main Features
1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).
2. Crack resistance can increase about 3~5 times.
3. Rigidity increases 1~3 times.
4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).
5. Prolong durability. It can delay the existence and expansion of cracks.
6. Protect the environment on which human beings depend on for existence, and reduce the deforestation.
Our Factory