electric bike 8fun BBS01 36v 350w mid drive e bike conversion kits with mid mount bicycle motor

Package content : 

1x 36v 350w crank mid drive motor  and controller inside . The waterproof connector .
1x cranks
1x lcd meter C961/C963/C965
1x screws and parts for installing motor
1x lcd meter and all cables
1x thumb throttle 
1x brake levers

different betteries you can choose

36v10ah rear rack lithium battery with charger

36v 13Ah samsung /panasonic bottle lithium battery with charger

                    36v 9ah waterbottle battery with charger

                36v 10ah waterbottle battery with charger

Advantages of this mid motor kit

1, This kits can be installed on standard normal bike frame easily, no need to   change the frame. 

2,High starting torque, Max torque≥80N, good performance on climbing.

3,Double clutch is used on drive unit, more safety.

4,High efficiency, low consumption, long travel distance.

Which bike can use this motor kits?

1. Bottom Bracket Width shall be 68mm
2. Front Derailleur shall be removed 

Crank  MID drives are the holy grail power-providers for electric bikes. If you want to know how you can spend a lot of money on an electric bike and get the ultimate in efficiency and performance this is a good start. MID drives are not the easiest or the cheapest electric bikes to build, but can be the cream of the crop once you are out riding, especially off road, especially climbing hills or even mountains.  When compared to a hub motor, a MID drive is an elegant solution. This is because MID drives allow you to use the bike's transmission as the motor's gears, so the electric motor can run in its optimum RPM range. This translates to a happier more efficient motor and a lighter better balanced e-bike. Why a lighter bike? When going through the gears, you dont need as heavy a motor to propel you up hills without smoking, and you dont need as much battery because a MID drive is considerably more efficient than a hub motor especially when climbing. 

Certificates