Thickess | Width | Roll Diameter | ||||
23/50/75/125 | ≤6300mm | ≤850mm | 76mm(3") | |||
152mm(6") | ||||||
Regular size: 50 micron, 2000m, 6000m, 12000m/roll with 3" or 6" paper core, other sizes can be customed. |
Properties | Unit | TEST VALUE | Method | |||||||||||
Thickness | TD | µm | 23 | 50 | 75 | 125 | ASTM374 | |||||||
Tensile Strength | MD | N/mm2 | 240 | 220 | 200 | 180 | ASTM D882 | |||||||
TD | N/mm2 | 265 | 255 | 225 | 205 | |||||||||
Elongation | MD | % | 120 | 125 | 130 | 145 | ||||||||
TD | % | 105 | 110 | 115 | 125 | |||||||||
Heat Shrinkage | MD | % | 1.4 | 1.26 | 1.25 | 1.25 | ASTM D1204 (150℃ X 30min) | |||||||
TD | % | -0.1 | -0.1 | 0.1 | 0.2 | |||||||||
Wetting Tension | / | dyne/cm | 56 | 56 | 56 | 56 | ASTM D2578 | |||||||
Light transmittance | / | % | 89.5 | 89.5 | 89.5 | 89.3 | ASTM D1003 | |||||||
Clarity | / | % | 99.4 | 99.3 | 99.3 | 99.2 | ||||||||
Haze | / | % | 1.5 | 1.6 | 1.7 | 1.8 | ||||||||
Appearance | / | / | Ok | Ok | Ok | Ok | JUB METHOD | |||||||
Remark: MD is machine direction, TD is transverse direction.The values above can not be understood as guaranteed values. They are only the basic test values for your reference. It can be adjusted according to your requirements.Wetting tension test is only applicable to corona treated film. |