double side sealant spacer for insulating glass contain aluminium butyl spacer strip

The spacer is made to connect two or more pieces of glass glazing sheets which might be low e or reflective glass or normal float colored glass a. The spacer was filled with desiccant together. Insulated glass/ Hollow glass/IGU/Double glazing glass with the perimeter of the spacer that gets in contact with the glass is properly sealed with primary and secondary sealants to ensure it with air/argon tight.

 SPECIATION :

  6mm~12mm

COLOUR:

 there is four colour to choose

Characteristics:
1. Good sealability: longer water vapor struction barrier such as water vapour.

 2. Higher production efficiency: inserting angle is not needed. Rubber spacer can be bent

 randomly. Profiled insulating glasses in various shapes canbe fabricated;

3. Good air tightness: macromolecule agglomerant and tackifier guarantee excellent seal properity.aluminum strip fully obstructs the infiltration of water vapor;
4. High temperature resistance: macromolecule tackifier improves the high temperature resistant and High moisture resistant properties of insulating glass;
5. Low temperature resistance: the enclosed mixing of desiccant and butyl-rubber ensures that the insulating glass is not dewfall at -50 °C;
6. Ageing resistance: macromolecule raw materials, antideteriorant, ultraviolet absorber and shielded agent.

The spacer is bendable, it can be turned into any shape.

Usage and attention:

1.The glasss by the washing machine to clean after drying, the one on the corner of a piece of glass paste interval article,article straighten interval,

   and edge of the glass to keep a distance of  2.5~3.0mm,and then from the edge of the glass will be around full article interval,Good sealing tape on interfaces,

  Pincer-like device reserved 2mm-3mm gap,and about 20mm apart more joint,insert the sealing tape in space,then joint pressure sealing tape,pinched connectors.

2.Put another piece of glass paste good spacing bar glass above,two pieces of glass must be mutual alignment,up and down to the flat.

3.Will paste together of hollow glass into hot press,hot pressing temperature control between 110-140℃,the outlet temperature control between 50-60 ℃.

4.According to the structure requirement to normal play a two-component silicone sealant,thus insulating glass production.

5.This product seal must be carried out in accordance with the article butyl interval sealing operation schematic drawing process,otherwise may cause the seal leakage.

  Our company is engaged in hollow glass accessories, our product is divided into two parts: Single channel seal strip, such as  heat composite rubber strip, butyl warm edge spacer and new composite rubber strip, the strips have the advantages of operating ea  sily; the other part is the traditional seal system inclding butyl hot adhesive, aluminum and silicon sealant. The  series of sillicon sealant incluing the glass and constrcture one .Both of them have psaa the national testing. We assure you that any further enquires from you will receive our prompt attentions.