dn16 Twin EPDM flexible Pre Insulated solar hose
Item | dn16 Twin EPDM flexible Pre Insulated solar hose |
Part No. | GDSIHTCSST20025J.20 |
Size | DN16 |
OD&ID | 20mm*16mm |
Wall thick | 13mm,20mm |
Material | Stainless steel |
MOQ | 100meters |
Brand | GD-FLEX |
Original | China |
Introduction
GD-FLEX pre insulated solar hose only require 1 step to finish the Solar Water Heater Pipe Installation.
GD-FLEX pre insulated solar hose only require 1 step to finish the Solar Water Heater Pipe Installation. Our pre-insualted flexible stainless steel Solar Hose with high temperature EPDM insulation pipe ,Strong Jacketing protection and 2-core temperature sensor cable pre-assembled , it is an ideal choice for your solar thermal system. It realizes the fast pipe connection among solar collectors, the pump station and the water tank. Non-welding required! The system is light weight and space saving, which is easy to handle, even in confined spaces. Flow and return pipes are marked clearly and can be easily distinguished. Smart Design- Break Point does good to installer separate twin pipes into 2 pipes without any destroy of the jacketing protection, meeting the installation demand very well.
Application
Piping systems for solar hot water, heating, heat pumps and air conditioning technology indoor, outdoor or underground piping system.
Structure
Twin solar hose: It consisting of high temperature resistance EPDM insulation, 2 x flexible corrugated stainless steel tubes (feed and return), UV-resistant, Silicone-sensor line, seamless jacketing protection.
Single solar hose:It Consisting of high temperature resistance EPDM insulation, 1 x flexible corrugated stainless steel tube, UV-resistant, seamless jacketing protection.
Single solar hose with Temperature Sensor Cable It Consisting of high temperature resistance EPDM insulation, 1 x flexible corrugated stainless steel tube (feed and return), UV-resistant, Silicone-sensor line, seamless jacketing protection.
Twin Solar hose Features
Specifically designed for solar thermal panels.:
8.Save time, Save space ,Save labor cost,Realize the fast , easy and reliable solar pipes installation
Our company is professionally producing twin/single pre insulated solar hose and corrugated stainless steel pipe, they are suitable for both residential and commercial solar water heater pipe installation. It is also can be used underground and inside the wall.
Our solar pipes realize the soldering free pipe connection of the solar water heater system.
Compared to the traditional copper pipe, our GD-FLEX solar hose reduced 90% welding points, traditional solar water heater pipe system requires 4 steps to install:
1) spread the copper pipe line 2) make the insulation out side the copper pipe line 3) wrap the plastic tapes out side of the insulation 4) connect the temperature sensor cable.
GD-FLEX Stainless Steel Solar lines are the only way to go. Only need1 step to complete the pipe installation. With a life expectancy of over 20 years, quick install, no leaking joints; there is simply NO comparison to copper.
The stainless steel comes with high temp EPDM foam and a weather proof membrane jacket. Also included is a sensor wire all in one pipe. SAVE TIME and MONEY. Solar Heating Solutions Made Simple!
Our twin pipe is of very smart designed. The twin pipes can be split into 2 pipes without any destroy the jacketing protection,the further provide the fast and convenience to the pipe installers.