NAME: distilled spirit explosion-proof turbine flow meter
Technical Parameter----liquid turbine flow meter |
|
Medium |
Non-corrosive low velocity liquid without impurity, not suitable for gas/steam |
Diameter& connection mode |
4,6,10,15,20,25,32,40 -thread connection (15,20,25,32,40)50,65,80,100,125,150,200 –flange connection |
Accuracy |
± 1%R, ± 0.5%R |
Range rate |
1:10; 1:15;1:20 |
Flange standard |
GB/T 9119-2010, DIN, ANSI, JIS |
Sensor material |
304stainless steel, 316(L)stainless steel |
Output |
Pulse, 4-20mA analog output, RS485 (Modbus-RTU protocol), HART |
Diameter& installation |
Flange connection DN15-DN200 ; Screw connection: DN4-DN50; Loose flange connection: DN4-DN200 |
Medium temperature |
Default type T1: -20℃~+80℃ (Standard) ; High temp. type T2: -20℃~+120℃ (OEM); High temp. type T3: -20℃~+150℃(OEM) |
Operation condition |
Operating temperature: -20℃~+60℃ Related humidity: 5%~90% Atmospheric pressure: 86kPa~106kPa |
Protection grade |
IP65( can be customized) |
Explosion proof |
ExiaIICT4 or ExdIIBT6 |
Flow range &pressure |
||||
Diameter(mm) |
Normal flow range(m³/H) |
Extended flow range(m³/H) |
Conventional connection mode &pressure rating |
Special pressure rating (Mpa)-Flange clamping |
DN4 |
0.04-0.25 |
0.04-0.4 |
Thread/6.3Mpa |
10,16,25 |
DN6 |
0.1-0.6 |
0.06-0.6 |
thread/6.3Mpa |
10,16,25 |
DN10 |
0.2-1.2 |
0.15-1.5 |
thread/6.3Mpa |
10,16,25 |
DN15 |
0.6-6 |
0.4-8 |
thread/6.3Mpa |
4.0,6.3,10,16,25 |
flange/2.5Mpa |
||||
DN20 |
0.8-8 |
0.45-9 |
thread/6.3Mpa |
4.0,6.3,10,16,25 |
flange/2.5Mpa |
||||
DN25 |
1-10 |
0.5-10 |
thread/6.3Mpa |
4.0,6.3,10,16,25 |
flange/2.5Mpa |
||||
DN32 |
1.5-15 |
0.8-15 |
thread/6.3Mpa |
4.0,6.3,10,16,25 |
flange/2.5Mpa |
||||
DN40 |
2-20 |
1-20 |
thread/6.3Mpa |
4.0,6.3,10,16,25 |
flange /2.5Mpa |
||||
DN50 |
4-40 |
2-40 |
flange/2.5Mpa |
4.0,6.3,10,16,25 |
DN65 |
7-70 |
4-70 |
flange/2.5Mpa |
4.0,6.3,10,16,25 |
DN80 |
10-100 |
5-100 |
flange/2.5Mpa |
4.0,6.3,10,16,25 |
DN100 |
20-200 |
10-200 |
flange/1.6Mpa |
2.5,4.0,6.3,10,16,25 |
DN125 |
25-250 |
13-250 |
flange/1.6Mpa |
2.5,4.0,6.3,10,16, |
DN150 |
30-300 |
15-300 |
flange/1.6Mpa |
2.5,4.0,6.3,10,16, |
DN200 |
80-800 |
40-800 |
flange/1.6Mpa |
2.5,4.0,6.3,10,16, |