diode laser stack Focus light for Anchorfree laser handle repair used for replacement

1 bar 100w diode laser stack Focus light for Anchorfree laser handle repair

3 bars 300w diode laser stack Focus light for Anchorfree laser handle repair 

Description:

Model: VS-MI-808-100-3-F1

Wavelength: 808nm
Output power: 300w
Operation mode: CW
Cooling: Actively micro channel cooling

High efficiency

High optical output power of 100W per bar.

Lifetime: >10000 hours, high reliability

Diode laser stack Drawing

Click to Contact Us Learn More Information

Repairing procedure Aroma diode laser 

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.(Please see follow repair process)

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.(Please see follow repair process)

>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

Diode laser handle piece and laser stack repair process

First , after we received the old broken handle from customer, we check the apperance of handle to confirm whether all the parts are completed and in good condition.

Second, we disassemble the Aroma ii handle piece, and test the old laser stack. For the aroma laser handle's laser stack, we will test each laser plate one by one to confirm whether there are any one bars still can work. If there have some good bars, the repairing charge will be lower.

Third, we choose best quality laser stack to replace the old broken one. Our bars are imported from Germany. We mounted bars and assemble them to laser stack in our lab. Every stack will be fully tested and had 8 hours buring test.

Finally, our experienced technician will reassemble the Aroma ii handle piece. Which include:

a: Install the new laser stack into the Aroma ii handle piece

b: Clean lens and check the TEC and other parts inside the Aroma ii handle piece

c: Test the power output of whole Aroma ii handle piece

d: Clean the cover shell of Aroma ii handle piece and package it.

1. Germany Imported laser bar(over 10000hours lifetime)

2. Professional technical team(So far we have repaired 36 pcs aroma ii laser handle)

ivylaser majors in diode laser mounting more than 11 years, We are a true factory with a Federal Standards 209E clean room. And the newest Ausn mounting technology will be applied when repairing the diode Aroma ii laser hair removal handle.

 3 Relaible feedback of our clients

Please contact me directly by clicking on the figure below.