dc ac 200A +5V single power supply split open-loop hall current hall sensor transducer
Introductions:
These are newly developed split core hall current sensor series which can be used for detecting of DC,AC, high frequency, pulse as well as various of irregular wave of current signals.
Primary and secondary isolation, pressure and safety.
Applied to a dual power supply system,power supply and output voltage support customized.
Features:
Open loop structure (convenient to use on existing line)
Compact and light
Easy to install
Flame retardant (UL94- V0).
Environmental protection( EU RoHS)
Advantages:
High precision and good linearity.
Low offset and gain drift.
Low insert loss, Good overload capacity.
Wide band frequency, quick response.
Application:
Communication base station equipment
New energy equipment
Welding machine power supply
Communication power
Switching power,
Medical equipment
Instrumentation,
Rail transit
Industrial measurement
Power control
Specification:
Model
parameters | HOVS-04K11 | HOVS-04K12 | HOVS-04K13 | HOVS-04K14 | HOVS-04K15 | HOVS-04K16 | Unit |
Input current | 100 | 200 | 400 | 600 | 800 | 1000 | A |
Measuring range | ±100 | ±200 | ±400 | ±600 | ±800 | ±1000 | A |
Output voltage | 2.5±2V (T=25℃) | V | |||||
Loaded resistance | ≥10 | kΩ | |||||
Supply voltage | +12(±5%) | VDC | |||||
Current consumption | ≤15 | mA | |||||
Zero offset voltage | <±20 ( T=25℃) | mV | |||||
Offset voltage temperature drift | <±20 ( T=25℃) | mV | |||||
Output voltage temperature drift | ≤±1mV/℃(IP=0 T=-10~+70℃) | mV | |||||
Linearity | ≤1 .0 ( T=25℃) | % | |||||
Accuracy | ≤1 .0 ( T=25℃ VC=±15V) | % | |||||
Response | <5 | µS | |||||
Insulation hipot | 3.0 | kV/Min | |||||
-3db band width | DC…10 | kHz | |||||
Working temperature range | -25~+80 | ℃ | |||||
Storage temperature range | -40~+85 | ℃ |
Size:
Instructions for use:
1. Connect the current according to the calibration direction of the circuit diagram, pay attention to the direction of current.
2. Connect the wire according to the function pin definition of the calibration in the structure diagram.