cummins KTA19 diesel engine for fire fighting split water pump
1. General: XS type pump is a new generation of high performance single- stage double-suction centrifugal split pumps. They are mainly used in delivering liquids of the water plant, airconditioner circulation water, heating pipe network system, building water supply, irrigation and drainage of pump stations, power plants, industrial water supply system, fire protection, ships industry and mine. It is a new substitute of SH, S, SA, SLA and SAP.
2. Main Performance Parameters: Pump outlet diameter 80-1400mm Capacity: 50-22140m3/h Head: 7-200m Liquid Temperature: -20-200 Solid parameter: ≤ 80mg/L Permissible pressure: ≤ 2.5Mpa.
3. Description of Pump Type:
For example: XS 250-450 A-L-R(M. F)- J
XS: Model
250: (mm)pump outlet diameter
450: (mm)impeller diameter
L: Vertical mount
F: Anti-corrosive
M: Anti-abrasive
R: For heating water
J: Mechanical seal.
4. Structure Features:
1). Type XS pumps work stably with less noise and vibration, may be properly work at raising speed due to short spacing between both side supports, thus they can be widely used.
2). The pipelines arrangement of type XS pump looks simple and beautiful due to inlet and outlet at the same line.
3). The same rotor of type XS pumps can be operated in reverse direction to avoid damage to the pumps by water hammer.
4). Unique design of high temperatare form: Using middle support, thickening the pump casing, using cooling seals and oil lubrication bearing, make XS pump suitable for working at 200 degree, especially for suppling heating net system.
5). Type XS pump can be vertically or horizontally mounted acoording to different working condition, with mechanical seals or packing seals.
6). With industrial design, the outline of XS is clear and beatitiful in line with modern aesthetics.
7). The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus reduce the operating costs significantly.
8). The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps which reduced the foundation costs and extend the using life.
9). Choosing import brand bearing, and other parts material chosen by customer, make the pump suitable for any operation condition and reduce the maintenance cost significantly.
10). It is not necessary to adjust mechanical seals, so it is very easy and simple to replace them.
11). It is rapid and simple to assemble and dismount the rotor parts due to using elastic prestress assembling.
12). It is unnecessary to make adjustment to any clearance when assembling.
XS80-210J
XS80-210
XS80-270J
XS80-270
XS80-370
XS100-250J
XS100-250
XS100-310
XS100-375
XS125-230J
XS125-230
XS125-290J
XS125-290
XS125-365
XS125-500
XS150-290
XS150-360
XS150-450
XS150-605
XS200-320
XS200-420
XS200-520
XS200-670
XS250-370
XS250-480
XS250-600
XS250-800
XS300-300
XS300-435
XS300-560
XS300-700
XS350-360
XS350-430
XS350-510
XS350-575
XS350-630
XS350-690
XS400-525
XS400-525J
XS400-560
XS400-600
XS400-665
XS400-665J
XS400-675
XS400-705
XS400-900
XS400-935
XS500-520
XS500-585
XS500-650
XS500-685
XS500-710
XS500-800
XS500-835
XS500-860
XS500-870
XS500-1015
XS600-560
XS600-600
XS600-630
XS600-705
XS600-710
XS600-860
XS600-885
XS600-1075
XS700-600
XS700-710
XS700-800
XS700-980
XS700-980J
XS800-800
XS800-900
XS800-990
XS900-970J
XS900-970
XS900-1030J
XS900-1030
XS900-1050J
XS900-1050
XS1000-1160
XS1000-1170J
XS1000-1170