Compression fittings line has been designed for the conveyance of fluids at high pressures for water conveyance for potable water distribution and applications in the thermo-hydraulic sector.This product line is designed in accordance with the most severeinternational standards in terms of mechanical properties and alimentary compatibilities.
The compression fittings allows the maximum working pressure of 16 bar at the temperature of 20℃
Fitting and clamp saddles are not suitable for use with hot water for the limits dictated by the use of polyethylene pipes.
Max operating temperature refer to ues of polyethylene pips;it is therefore necessary to refer to the regulations applicable in the country of use.The fittings and clamp saddles can withstand temperatures below 0℃.The table below shows the Max operating pressure during continuous operation with changes in temperature.
Compression fittings are designed specifically for connecting polyethylene pipes with an outside diameter of 20-110mm.They are fully compatible with all PE80 and PE100 pipes complying with EN ISO 4427,ISO 14236,DIN8074.They are normally used to convey drinking water and fluids at pressures to 16 bar for generic application.The quality of the materials used makes these fittings resistant to etching by numerous chemical substances and to UV-rays.It is universal fitting can be used to connect systems using PE metric piping with existing pipes made of any material.
A Chamfer the pipe with beveler tool
B Slackend the ring nut with out removing from the body check that O-ring and clip ring are in proper position.
C Insert the pipe end with out tightening the ring nut.Push the fitting until the pipe oversteps the O-ring and reaches the stop
D Hand tighten the ring unt the tighten further with a strap/chain wrench.
D75-110mm recommended
A After preparing pipe ends unscrew the fitting.Then remove all internal components:the ring nut,the clip ring,the packing presser bush and the O-ring
B Push the pipe into the fittings until it reaches the slop.Insert the O-ring and position the same by inserting the packing-pressure bush
C Displace the clip ring onto the pipe as shown in picture C.
D Slide the ring nut over the clip ring and tighten with a strap/chain wrench in order to complete the assembly.
Our compression fitting has been tested and approved by all the leading certification agencies.
Quality system is :EN ISO 1549 4:2015
Q: Are you trading company or manufacturer ?
A: We have our own pipe and fitting factory, and we also sell the plastic welding machine.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. If it is not available will be according to the quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: L/C,PAYPAL,Western Union,MoneyGram,T/T and so on.
Q: Can I visit your factory?
A:Sure, our factory in Chengdu, China. If you want to have a visit to our factory, please contact us to make an appointment.
Q:What about the after-service
A :Cantact us first, then we will arrange the after-sale service .
Q: Can you make my designs? OEM or ODM models?
A: Yes, we can make your designs. OEM and ODM models are always welcomed too.
Q: Where is your loading port?
A: Ningbo,Shanghai,Dalian.
Q: What if I can't find the infos I'm looking for, or what if I want to speak to someone directly?
A: 1)Start online TM or inquiry now, feedback will be got promptly or latest within 24 hours.
2) Call customer service at +86-28-84319855 for customer service support.