Brief introduction
Semi-automatic Folder Gluer machine is the carton manufacturing of new environmental protection equipment in recent years, mainly for the carton stick, discard the traditional copper nail binding method, improve the production efficiency, make good quality box.
Main features:
folder gluer machine is mainly used to produce single face and double face corrugated non-nail cartons. It may meet the demands for multi-kinds and large quantity productions. Especially the packing cartons of food, clothes, medicine and comestic etc.
1. One minute quickly changes specification.
2. Gluer wheel always keeps running even when the machines stops, which avoids glue drying and leaking.
3. The working stage goes up and down automatically while the cardboard always stays at working place.
4. Using soft-sunshine wheels to transport cardboard.
5. The cartons are output automatically when they are piled up to installed seat.
6. Speed reducer for gear, press button and switch, stroke switch, photoelectricity switch,counter,contactor and conveying belt are imported from Taiwan.
7.The whole set of gluing head use imported material and processed precisely. It is abrasion-resistant and Corrosion-resistant.
Installation and test:
1. folder gluer machine fix the machine,adjust the screws of four corners,update balance and well fix screws.
2. go through the power line(380v pressure)together with paper conveyor,then lock up screws.
3. test at entire machine,press the switch on the front, middle and paper conveyor belt.if the conveyor belt would move normally beginning to end,it says the running direction of conveyor belt is all right.otherwise,it’s best to update power to change running direction.