Specification:
Item | Conveyor Water Grinding Machine |
Type | YL-PM-044 |
Voltage | 380V, 50Hz, 3 Phase, 4 Wires |
Power | 13KW |
Motor | 5.5KW-4 Phase*1, 4KW-4 Phase*1, 3KW-4 Phase*1 |
Water Pump Power | 125W |
Conveyor Belt Motor power | 2.2KW, RV75, 1:30 |
Conveyor Belt Speed | 0-14 Meter/ Minute |
Conveyor Belt Size | Length 4600* Width 150* Thickness 10mm, Climbing Belt |
Up & Down Height | 0-80 MM |
Up & Down Speed | Turn Hand Wheel Each Round Can Up and Down 0.24 MM. |
Abrasive Belt Size | 2100*150 MM (L*W) |
Abrasive Belt Speed | 14 M/S |
Grinding Area | 150*150 MM (L*W) |
Machine Size | 3000*1300*1900 MM (L*W*H) |
Water | Inject Two Thirds of Water to The Water Tank |
Grinding Liquid | 2-3 KG, Cutting and Anti-rust Liquid |
Application:
Widely use for all metal flat and plane surface sanding and grinding. Such as stainless steel panel, aluminum board, copper sheet, zinc panel, alloy sheet, brass board, and so on.
Feature:
Attention:
1. Should use more grinding liquid during grinding iron products to anti rust.
2. The mixing ratio of water and cutting & anti-rust liquid should be 15kg: 1kg. (If exceed this ratio will affect the anti-rust effect.)
3. Products will become thinner and thinner after sanding and grinding. So should adjust the abrasive belt position according to the products.