MAGAODING offers superior conductive inks and conductive coatings to address a wide variety of applications in the energy, consumer electronics and utilities industries. Sandoz's product range of conductive, dielectric and other functional polymer thick film inks have been used to apply selective coatings on a variety of flexible and rigid substrates, via screen, flexographic and rotogravure printing methods.
Our conductive coatings and inks can be effectively dried or cured through heat or UV radiation. Sandoz's conductive inks (silver, silver/silverchloride, carbon-based, dielectric and other functional [e.g., electroluminescent pigments-based]) are used for the production of:
Flexible circuits for membrane touch switches
Keyboards for desktop and notebook PCs
Heating elements
Automotive sensors
Biosensors and EKG/ECG electrodes
Antennas for contactless smart cards and RFID labels
Touch screens
EL lamps
Printed circuit boards and potentiometers
Viscosity |
5~30Pa.S (10rpm, 25°C, 2min) |
Solids Content by Weight |
60±5% |
Screen |
Stainless steel screen: 165~325mesh / Polyester screen: 160~300mesh |
Recommended drying T/t |
130°C/30min, or 150°C/10min |
Theoretical Coverage |
100-200 cm2/g(depends on the thickness of membrane ) |
Sheet Resistance |
<0.06 Ω/(thickness of membrane: 6µm) |
Adhesion |
3M600 adhesive tape×1min,pull vertical, no exfoliation |
Pencil Hardness |
≥2H |
Flexibility |
R<2Ω (width 1mm,2kg×180°,bend×1min×10times) |
Maximum service temperature |
<70°C |
We also supply EL RAW MATERIAL
1. EL ,ELECTROLUMINESCENT PHOSPHOR Powder,
2. Phosphor powder PasteAB
3. Barium power,
4. ITO film
5. Silver paste, Silver conductive ink
6. UV Insolation Ink