closed loop 1.8 degree high torque NEMA 34 cnc stepper motor with driver
Hybrid Easy Servo System:
1. Position error correction and never lose steps
2. High torque at high speed
3. Quick response and perfect acceleration
4. Automatic current adjustment based on load, lower temperature rising.
5. high dynamic performance at acceleration and deceleration, No vibration from high speed to zero speed.
6. Pulses response frequency can reach 200KHZ
7. 16 kinds microsteps choice, highest 51200microsteps/rev.
Motor Eelctrical Parameters:
Model | Step angle | Current | Resistance | Inductance | Holding torque | Motor length | Total length | Suitable driver |
57HSE2N-D25 | 1.8° | 4.2A | 0.5±10%Ω | 1.8±20%mH | 2.0N.m | 76mm | 97mm | HSS57 |
60HSE3N-D25 | 1.8° | 5.0A | 0.45±10%Ω | 1.8±20%mH | 3.0N.m | 88mm | 109mm | HSS60 |
86HSE4N-BC38 | 1.8° | 6.0A | 0.45±10%Ω | 3.7±20%mH | 4.5 N.m | 82mm | 103mm | HSS86 |
86HSE8N-BC38 | 1.8° | 6.0A | 0.44±10%Ω | 3.7±20%mH | 8.0 N.m | 118mm | 139mm | HSS86 |
86HSE12N-BC38 | 1.8° | 6.0A | 0.45±10%Ω | 5.2±20%mH | 12.0 N.m | 156mm | 177mm | HSS86 |
Motor drawing:
57HSE2N-D25:
60HSE3N-D25:
86HSE4N-BC38, 86HSE8N-BC38, 86HSE12N-BC38:
Drivers for the motors:
HSS57/HSS60 voltage range: DC24-50V, peak current: 6A
HSS86 voltage: AC20-80V / DC30-110V, peak current: 8A
Microstep setting:
Micorstep/rev | SW3 | SW4 | SW5 | SW6 |
Default(400) | on | on | on | on |
800 | off | on | on | on |
1600 | on | off | on | on |
3200 | off | off | on | on |
6400 | on | on | off | on |
12800 | off | on | off | on |
25600 | on | off | off | on |
51200 | off | off | off | on |
1000 | on | on | on | off |
2000 | off | on | on | off |
4000 | on | off | on | off |
5000 | off | off | on | off |
8000 | on | on | off | off |
10000 | off | on | off | off |
20000 | on | off | off | off |
40000 | off | off | off | off |
Wiring Diagram:
(we will provide the cables for the encoder, usually have 2meter, 3 meters, 5 meters, and 8 meters for choice)
Hybrid Easy Servo System (closed loop stepper motor and driver)
Lower cost then servo system, but higher performance than stepper motor
The best Choice for engraving machine, cnc router, plasma cutting machine and other automatic equipment
Lead time:
Quantity under 50 sets we have in stock, 51-200 sets lead time will be 7 days.
Payment:
T/T, Paypal, western union, money gram, L/C can be accepted.
Shipping method:
1)International Express delivery DHL&FEDEX 4-7days, TNT&ARAMEX 7-10days
2)Shipping by air 7-10 days
3)shipping by sea, delivery time depends on the destination port.
Technical Support:
We can provide you professional technical support. And our products quality guarantee is 18 months. Also we accept products customize.
Contact:
Skype: iviezhai
Whatsapp: 8613401517369
Wechat:iviezhai
Tel: 86-519-86922120
Cell: 86-13401517369
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier