clear coat polyurethane water-based acrylic paint sheen of bucket

Solid content (%)

≥50

Fineness (μm)

≤40

Surface drying

0.5~1 h (25℃ )

Complete drying

1 days(25℃)

Impact strength (cm)

≥50

Flexibility

≤1

Surface treatment

All surfaces to be coated shall be clean, dry and free of pollution. All surfaces shall be evaluated and processed according to
ISO8504:1992 standard, and the grease shall be removed according to the requirements of SSPC-SP1 solvent cleaning standard.

Precautions

When brush or roller coating the product, it may be necessary to be coated more times in order to obtain the specified dry film
thickness. It should avoid to be coated too thick, and the thickness of wet film should not exceed 150μm.

Low temperature curing: This product is a water system. It is not suitable for low temperature environment. It is not recommended
to construct when the temperature is below 10℃ . Because when the temperature is below 10℃ , the product cannot be fully
solidified; when the temperature is below 0℃ , the product will freeze, and cannot be used.