* Main Performances Parameters | ||
Size | DN3-DN3000mm | |
Nominal Pressure | 0.6-1.6Mpa(2.5Mpa/4.0Mpa/6.4Mpa...Max 42Mpa) | |
Accuracy | +/-0.5%(Standard) +/-0.3% or +/-0.2%(Optional) | |
Liner | PTFE, Neoprene, Hard Rubber, EPDM, FEP, Polyurethane, PFA | |
Electrode | SUS316L, Hastelloy B, Hastelloy C Titanium, Tantalum, Platinium-iridium | |
Structure Type | Integral type, remote type, submersible type, ex-proof type | |
Medium Temperature | -20~+60 degC(Integral type) | |
Remote type(Neoprene,Hard Rubber,Polyurethane,EPDM) -10~+80degC Remote type(PTFE/PFA/FEP) -10~+160degC | ||
Ambient Temperature | -20~+60deg C | |
Ambient Humidity | 5-100%RH(relative humidity) | |
Measuring Range | Max 15m/s | |
Conductivity | >5us/cm | |
Protection Class | IP65(Standard); IP68(Optional for remote type) | |
Process Connection | Flange (Standard), Wafer, Thread, Tri-clamp etc (Optional) | |
Output Signal | 4-20mA/Pulse | |
Communication | RS485(Standard), HART(Optional),GPRS/GSM (Optional) | |
AC220V (can be used for AC85-250V) DC24V (can be used for DC20-36V) DC12V (optional), Battery Powered 3.6V (optional) | ||
Power Consumption | <20W | |
Alarm | Upper Limit Alarm / Lower Limit Alarm | |
Self-diagnosis | Empty Pipe Alarm, Exciting Alarm | |
Explosion Proof | ATEX | |
* Main Performances Of The Electrode Materials | ||
Electrode Material | Application | |
SUS316L | Applicable in water, sewage and low corrosive medium; Widely used in industries of petrol, chemistry, carbamide etc. | |
Hastelloy B | Having strong resistance to hydrochloric acid of any consistence which is below boiling point. Resistable against vitriol,phosphate, hydrofluoricacid, organic acid etc which are oxidable acid, alkali and non-oxidable salt. | |
Hastelloy C | Be resistant to oxidable acid such as nitric acid, mixed acid as well as oxidable salt such as Fe+++,Cu++ and sea water | |
Titanium | Applicable in seawater, and kinds of chloride, hypochlorite salt, oxidable acid (including fuming nitric acid), organic acid, alkali etc. Not resistant to a pure reducing acid (such as sulphuric acid, hydrochloric acid) corrosion. But if acid contains antioxidant (such as Fe+++,Cu++) is greatly reduce corrosion | |
Tantalum | Having strong resistance to corrosive mediums that is similar with glass. Almost applicable in all chemicals mediums except for hydrofluoric acid, oleum and alkali | |
Platinum-iridium | Almost be applicable in all chemical mediums except fortis, ammonium salt |