china 3.2m large format digital printer machine konica 512i dx7 dx5 print head outdoor flex banner eco solvent printers for sale

How to use the photo machine correctly:
When replacing the nozzle,be sure to prevent air leakage between the nozzle and the ink tube,and be sure to remove the air bubbles in the ink tube.
Non-professionals are not allowed to change the default settings of the machine.
The ground wire of the machine and the computer is connected according to the standard and the irrigation wet salt water is regularly checked to ensure that the static electricity can be eliminated in time.
The daily cleaning of the grating strip should be cleaned with a cotton swab dipped in alcohol.
The guide shaft should be cleaned regularly.If it is dirty,wipe it with paper towels to reduce the resistance to the trolley.
Check and clean the maintenance station regularly.
Do not let the nozzle leave the maintenance station for a long time and be exposed to the air.

Maintain the machine regularly to reduce the impact of dust,ink,etc.on the machine:
Wipe the ink cartridge (the cartridge of the cleaning head),clean it every week,remove it and rinse it with water.Do not lose the ink sheet and put the grating strip correctly.Weekly cleaning,daily observation,wipe with a cotton swab + distilled water or alcohol.Vigorously promote the contact sheet of ink cart and ink head,check daily,Make sure there is no ink stains,too much alcohol may dissolve the mounting adhesive of the microcircuit.
Please use original ink,original ink is your best choice.Cannot be mixed.
Note that the ink head nozzles should not be wiped.If there is ink,you can use a non-depilatory cloth or a good-quality paper towel to stick and suck it away,otherwise the ink holes may be blocked.
Note:The machine must be connected to the ground wire; when the air is dry,the problem of static electricity cannot be ignored.When using certain adhesive and lamp media,it has more electrostatic charge (especially when the paper feed speed is very fast); the electrostatic charge can be Cause the machine and ink head to be damaged safely,take grounding.

Discharging static electricity by wire is the only way.Since the human body is a huge static power source,make sure that both hands are discharged when touching the ink head with electricity (contacting a grounded metal body or wearing a static wristband),otherwise it will easily cause ink on the ink head.Point damaged.

Daily maintenance of inkjet printer:
1.How to use software to make drawings (control software,map software)?
answer:
1.Plug in the power of the machine,turn on the machine switch,then turn on the computer,and find the control software icon and map software on the desktop.
2.After setting the origin in the control software,you can use the map software to map.
2.How to maintain the nozzle properly?How to calibrate the nozzle?
Answer:When using the tray equipped with the machine,first pad a layer with a cloth,and then put the cleaning liquid,and then fix the tray.
3.Under what conditions does the inkjet printer produce the best results (ie what humidity and temperature)?How to increase (decrease) humidity and temperature?
answer:
1.The temperature is between 20-28 degrees,and the humidity is between 40%-70%.
a) It is better to install air conditioner to adjust the temperature increase and decrease.
b) Decrease and increase the humidity,add the humidity with the applicator.
4.What are the factors related to the plugging?How to soak the nozzle correctly?How to use the syringe to inject the nozzle correctly?
answer:
1.The use of non-original ink or ink that does not match the type of the nozzle will easily cause the nozzle to block.
2.Use the tray soaking nozzle.
3.Use a syringe to pump up the cleaning solution,then use the syringe to align the nozzle with the nozzle to connect the cleaning solution,and then suck back.
5.Do you know the importance of the inkjet printer and computer must be grounded?What are the serious consequences if not grounded?
Answer:When the machine is working,it will generate static electricity with the material.If the ground wire is not connected,it will damage the nozzle and burn the board.
6.How to correctly press ink?What serious consequences may result from incorrect ink pressing?
Answer:1.Press the ink according to the color.For example,if the ink is cut off in red,press the red button.If you don’t follow the corresponding button,the nozzle is easy to clog and cut ink.
7.How to absorb ink in the drawing process?How to adjust the pressure?
Answer:1.The ink cut phenomenon is found during the drawing process,pause at the midpoint of the control software,and then press the ink.
2.There are options for voltage setting in the setting menu.
8.How to use the inkjet printer control panel (these settings are in the control panel)?How to adjust the step value and the interval between nozzles.
answer:
1.There is a heating panel and an emergency stop button on the inkjet printer.Don't press the emergency stop button when the machine is working.
2.Adjust the step value according to the corresponding pass number
3.Adjust the two-way distance according to the corresponding head speed.
9.How to ensure that the designed length in the computer is consistent with the actual printed length?
Answer:Before painting,first check in the map software whether the length of the picture is the same as the size of the original picture.If it is not the same,you can modify it to the required size.
10.How to maintain the ink supply system?
Answer:The ink supply system must be cleaned with cleaning fluid after more than half a year.The tube inserted into the ink is pulled out during cleaning.Press the ink key to squeeze the ink out of the ink cartridge,and then insert the tube into the cleaning fluid and press it again.
Eleven,track maintenance requirements?
Answer:The guide rail is wiped with solid lubricating oil on both sides of the guide rail for 10-15 days.Before using the oil,wipe the dirty motion on the guide rail with a clean cloth
12.What are the causes and solutions of computer report data transmission errors?
Answer:After the installation of the control software,the parameters must be backed up to prevent viruses in the computer.If errors such as 122 or 310 are reported,the parameters need to be restored.
13.Will the ink pump be replaced?
Answer:The membrane pump has been working or not moving,so you need to replace the ink pump.To replace it,just cut the red and black lines on the ink pump and connect it to the new ink pump line,according to the color.

Inkjet printer maintenance tips
The problem of nozzle clogging during the use of inkjet printers is mainly based on "prevention". The best way to maintain the best working condition of the nozzle is that you do some proper and effective daily maintenance on the nozzle every day, which will greatly reduce the possibility of nozzle clogging, so please read the following carefully and refer to the operation.
One. After the installation of the equipment, and the maintenance of the nozzle at the initial stage of the operation of the equipment
1. In order to make the nozzle into the best operating state, before the equipment officially begins to undertake the production business, please be sure to print as many pictures as possible in 1-2 days. The pictures are preferably used in CMYK 4 colors, and in the picture The color bars of C, M, Y, and K should be added on both sides to ensure that the four nozzles are always in the ink-jet state.
2. It is best to take out the moisturizing sponge in the rightmost cleaning station together with its bracket when printing.
two. How to maintain the print head after the work is completed every day
After all the print jobs are completed every day, in order to keep the nozzles in the best working condition and avoid clogging the nozzles due to the evaporation of solvent ink, please follow the following methods to maintain the nozzles overnight.
1. Turn off the device.
2. First clean the moisturizing sponge with a special cleaning solution, and then pour the cleaning solution on the sponge to wet it.
3. Move the machine head back to the cleaning station at the far right and tightly combine the nozzle with the moisturizing sponge.
4. Keep this state and let the device stay overnight.
three. Treatment method after the nozzle is found to be slightly clogged
1. After the nozzle is found to be slightly clogged during the printing process, press the PAUSE key to pause the print job without hesitation, and then use a vacuum cleaner or a manual air pump to make the ink spray from the nozzle for nozzle cleaning. After cleaning, you must use a plastic squeeze bottle to the nozzle Spray some cleaning liquid on the surface to wash off the residual ink.
Note: Do not use excessive force when using the manual air pump, otherwise the nozzle will be damaged due to excessive pressure.
2. Timely and decisive and thorough handling of nozzle clogging is very important to maintain the best working state of the nozzle during long printing!
3. In addition, it is also necessary to carefully check the condition of the nozzle and find the cause of the nozzle clogging.
four. Treatment method when nozzle clogging frequently occurs in the process of spray painting
1. First press the PAUSE button to pause the printing operation, then press the PURGE button to move the machine head to the leftmost cleaning position.
2. Keep the power of the device turned on, and unplug all the signal wires of the liquid level sensor connecting the auxiliary ink tank to the machine head control board.
3. Unplug the ink supply tube (from the secondary ink tank) on the nozzle, and then use a glass syringe to draw a special cleaning solution to clean the nozzle. Method: Use 40ml of cleaning solution each time, once every 10 minutes, a total of 3 to 4 times.
4. After cleaning, reinsert the ink supply tube and level sensor signal lines, and then continue the previously suspended print job.
Fives. The treatment method when the above treatment methods have little effect or no effect temporarily
1. Remove the nozzle from the nozzle tray.
2. Pour an appropriate amount of special cleaning solution into a clean glass container (eg, beaker). It is appropriate to submerge the bottom of the nozzle by 2 to 3 mm after placing the nozzle, and then seal the glass container with plastic wrap (anti-ash) and let it stand for more than 1 day .
Note: Do not touch the cleaning fluid on the top of the nozzle, otherwise it will damage the nozzle.
3. After the nozzle is soaked, pour the appropriate amount of special cleaning solution into the printer nozzle cleaner, then immerse the bottom of the nozzle into the cleaning solution and immerse it for about 2~3mm, then start the cleaner, select the special nozzle cleaner, if you use general ultrasonic The cleaner must strictly control the time to prevent damage to the nozzle.
Note: It is not necessary to use the cleaner for more than three consecutive times.
4. Use a glass syringe to draw 40ml of special cleaning solution, and inject it from the ink supply tube connection on the upper part of the nozzle. Pay attention to observe the state of the water line ejected from the nozzle. If all the water lines are straight, it means that the cleaning is effective. This nozzle can continue Use (prerequisite: both the circuit and the piezoelectric crystal are intact), if there is still a part of the water line sprayed, you must do it 2 or 3 times according to steps 2 and 3.
six. The treatment method when the equipment is expected to be not used for more than 48 hours
If the equipment is not expected to be used for more than 48 hours, the ink in the nozzle must be cleaned, otherwise the ink in the nozzle will dry due to the gradual evaporation of the solvent, and it may even cause irreversible damage to the nozzle. The processing method is as follows:
1. Turn off the power of the printer.
2. Move the machine head to the left-most cleaning position, and put a corrosion-resistant container under the spray head to hold the cleaning waste liquid.
3. Use a glass syringe to draw out or pour out the ink in the secondary ink tank directly, and then wash the secondary ink tank with a special cleaning solution.
4. Unplug the ink supply tube (from the secondary ink tank) on the nozzle, and then use a glass syringe to draw 40ml of special cleaning liquid to clean the nozzle, a total of 2 times. Finally, don't blow off the cleaning fluid remaining in the nozzle, you must leave enough cleaning fluid inside the nozzle, because the cleaning fluid can moisturize the nozzle.
5. Put the treated sprinkler in a clean corrosion-resistant container and seal it (it is good to use plastic wrap) to store it for about 1 month.