Introduction of insulation pipe:
Product name | chilled water plastic foam red silicone elbow insulation pipe |
Composition | 1.steel pipe 2.polyurethane insulation 3.high-density polyethylene |
Usage | 1.urban centralized heat supply 2.warm room 3.coal mine 4.petroleum 5.chemical and other anti-corrosion insulation field |
Angles | 30°,45°,60°,90° |
Medium teperature | 50°C—120°C,140 °C |
Working pressure | <2.5Mpa |
Laying method | 1.direct bury 2.built on stilts 3.trench |
Technology | 1.Advanced Corona treatment 2.Impeller blasting 3. Leakage alarm line |
Standards | GB/T29047-2012, EN253:2003 GB/T9711.1-1997, GB/T8163-1999 |
Advantages | 1.good insulation properties ,low heat loss (the 25% of traditional pipes), 2.energy saving 3.waterproof and corrosion resisdence 4.no trench,be directly buried in ground or water |
Process
specification
DN | Length 1.5D | Length 2.5D | Length 3.0D | Length 3.5D | Length 4.0D |
20 | 410 | 520 | 525 | 530 | 535 |
25 | 415 | 525 | 530 | 535 | 540 |
32 | 420 | 530 | 540 | 545 | 565 |
40 | 425 | 540 | 550 | 560 | 565 |
50 | 430 | 550 | 560 | 570 | 585 |
65 | 445 | 570 | 590 | 600 | 615 |
80 | 450 | 580 | 600 | 615 | 635 |
100 | 470 | 605 | 625 | 645 | 665 |
125 | 600 | 630 | 655 | 680 | 710 |
150 | 640 | 655 | 685 | 715 | 750 |
200 | 700 | 810 | 850 | 890 | 930 |
250 | 800 | 860 | 910 | 960 | 1015 |
300 | 850 | 910 | 975 | 1035 | 1095 |
350 | 900 | 960 | 1035 | 1110 | 1180 |
400 | 950 | 1015 | 1095 | 1180 | 1265 |
450 | 1200 | 1265 | 1360 | 1450 | 1545 |
500 | 1200 | 1320 | 1420 | 1525 | 1630 |
600 | 1200 | 1420 | 1545 | 1670 | 1795 |
700 | 1300 | 1525 | 1670 | 1815 | 1960 |
800 | 1400 | 1630 | 1795 | 1960 | 2025 |
900 | 1400 | 1930 | 2200 | 2305 | 2490 |
1000 | 1400 | 2035 | 2245 | 2450 | 2655 |
1200 | 1500 | 2500 | 2800 | 3100 | 3400 |
1400 | 1500 | 2500 | 2800 | 3100 | 3400 |
Picture for insulated pipe fitting elbow:
1: Are you a manufacturer or a trading company?
We are a manufacturer which has more than 2 0 years' history.
2: Where is your manufacturer? How to visit it?
Our factory located in Yutian Economic Development Zone ,TangShan , China. A bout 1.5 hours drive time to Beijing and TianJin airport . Mainly producing pre-insulated pipes, HDPE outer protection pipe and 3PE anti-corrosive pipe.
You can take a plane to Beijing or Tianjin .then we could pick up you at the airport .
3: How do we control our products' quality?
We have professional quality control workers and quality inspection center(CNAS lab) to control the entire production quality.
4: How do you transport these products?
We use straps to hoist pre-insulated pipes, it can avoid no damage to our products, no hooks for lifting pipe directly. During the handling process, collision, tossing and more ground drag scrolling are strictly forbidden.
In the process of long distance transport, the pipes should be fixed, and not damage outer protecting pipes and insulating layers.
5: Can I customize some other sizes of products?
Yes! We can according to the customer's request.
If you have any other questions, please don't hesitate, contact us.
Let us begin to communicate immediately >>>