Spray booth size | 2550X1500x3300mm (LXWXH) |
Wall panel | 2mm thick painted cold rolled steel sheet,Handiwork Door,Galvanized Steel Roof Panel 1 set of front door, size:600*1000mm(W*H) |
Air Circulation System | 1 set of T30-6C 2.2kw axial flow fan for paint exhaust |
filter system | Wall board made of 2.0mm cold plate,water tank made of 3.0mm cold plate, processing paint on the surface, with bolt connecting water curtain filter or dry filter |
Light | Ceiling Light: 2 units 18w*2pcs LED lights |
Conveyor | Track use special conveyor for the fit the chain,total 36m Jig :For loading the parts,loading capacity is 6kg each,total 90pcs for the line,each 406.4mm is one jig Automatic rotating device:For automatic rotating the parts while painting,with gear motor and chain system Chain:Distance between two wheels is 50.8mm,distance between two bearing wheel is 304mm Chain wheel:Size :φ=500mm,for transmission and moving the chain Tension box for tension the whole line Driving motor:Gear motor 1 set of 2.2kw for driving the whole line,motor use TECO or better brand. Moving speed:0.3-3m/min,adjustable |
Automatic painting machine | Each spray booth fix with 6 sets of automatic guns, total 12 sets of automatic guns,Japanese Anest Iwata brand |
Control system | Control system:PLC control unit,touch screen,can set program on PLC and control the whole line,use Omron brand of PLC,and Schneider brand electric components |
Outside size | 12000x1650x1400mm (LXWXH) |
Inside size | 12000x1500x550mm (LXWXH) |
Wall panel | Rock wool steel board,75mm thick(150℃ temperature resistance),inner and outside steel board is 0.4mm thick galvanized steel,anti-flame and heat-insulation(80℃ temperature resistance) |
Fan | 2 sets of 1.1kw hot air circulation fan, each one air flow capacity:1250m3/h |
Heating system | 12units*3kw=36kw stainless steel electric heating tubes,heating temperature 50-60degree, heating time: 10-20 min(0-80degree) |
Conveyor | Size:15500*1300*850,supporting pillar made of 40*80*2.0mm square tube,side made of 3mm thick steel bending,driving motor is 1.5kw gear motor,frequency conversion speed governor is 1.5kw,speed from 0-6m/min adjustable.Bottom with M16 adjustable feet,adjustable height ±50mm. |
Control system | PLC control system |