cheap electronic auto-ranging dt850l clamp digital multimeter
DT33 Series
Model | DT33B | DT33C | DT33D | ||
DCV | 200m-2000m-20-200-500V ±0.5% | ||||
ACV | 200-500V ±1.2% | ||||
DCA | 200μ-200m-10A ±1.8% | ||||
OHM | 200-2000-20k-200k-20MΩ ±1.0% | ||||
Diode Test | • | • | • | ||
Back-light Function | • | • | • | ||
Battery Test | 1.5V-9V-12V | - | - | ||
Temperature | - | -40°C~1000°C ±3.0% | - | ||
Continuity Buzzer | • | • | |||
LCD Size | 48X16mm | ||||
DT920 Series
Model | DT9205A | DT9208A | |
DCV | 200m-2-20-200-1000V ±0.5% | ||
ACV | 2-20-200-750V ±1.0% | 20-200-750V ±1.0% | |
DCA | 200μ-2m-20m-200m-20A ±1.0% | 20μ-20m -200m-20A ±1.8% | |
ACA | 2m-20m-200m-20A ±2.0% | 200m-20A ±2.0% | |
OHM | 200-2K-20K-200K-2M-20MΩ ±2.0% | 200-2K-20K-200K-2M-20M-200MΩ ±1.0% | |
CAP | 2n-20n-200n-2u-20uF ±4.0% | ||
Frequency | 20KHz ±1.5% | 2K-200KHZ ±3.0% | |
Temperature | - | -20°C~1000°C ±1.0% | |
Diode Test | • | • | |
Continuity Buzzer | • | • | |
Transistor Test | • | • | |
DT830 Series
Model | DT830B | DT830C | DT830D | ||
DCV | 200m-2000m-20-200-1000V ±0.8% | ||||
ACV | 200-750V ±1.5% | ||||
DCA | 2000μ-20m-200m-10A ±1.2% | ||||
OHM | 200-2000-20K-200K-2M-20KΩ ±1.0% | ||||
Diode Test | • | • | • | ||
Transistor Test | • | • | • | ||
Battery Check | - | • | - | ||
Continuity Buzzer | - | • | • | ||
Square Wave Output | - | - | • | ||
Temperature | - | -40°C~1000°C ±3.0% | - | ||
DT266 Series
Model | DT266 | DT266C | DT266F | ||
DCV | 1000V ±10% | 200m-2-20-200- 1000V ±0.8% | 2-20-200-1000V±0.8% | ||
ACV | 750V ±12% | 200-750V ±12% | |||
ACA | 200-1000A ±2.5% | 20-200-1000A ±2.5% | 200-1000A ±2.5% | ||
OHM | 200-20k-200k-2000KΩ±10% | 200-20k-2M-20M-2000M ±1.0% | 200-20k-200k-2000KΩ ±1.0% | ||
Temperature | - | -40~750°C±30% | - | ||
Measurement | - | -40~1832°F±30% | - | ||
Frequency | - | - | 2KHz ±3.0% | ||
Continuity Buzzer | • | • | • | ||
Date Hold | • | • | • | ||
Accept Plug-insulation Tester Adapter Dt261 | • | • | • | ||
Jaw Caliber | φ57mm | ||||
DT201 Series
Model | DT201 | DT201C | DT201F | ||
DCA | 1000V ±0.8% | ||||
ACV | 750V ±1.2% | ||||
ACA | 20-200-1000A ±20% | 200-1000A ±20% | |||
OHM | 200-2KΩ ±10% | 20k-2MΩ ±10% | 20K-200K-2MΩ±1.0% | ||
Temperature | - | -40~ 100°C±20% | - | ||
Measurement | - | -40~1832°F±30% | - | ||
Frequency | - | - | 20KHz ±3.0% | ||
Diode Test | • | • | • | ||
Continuity Buzzer | • | • | • | ||
Date Hold | • | • | • | ||
Jaw Caliber | φ55mm | ||||
Function | Measuring Range |
Metal Detector | Depth up to 25mm ( Φ15mm steel pipe) |
Voltage Detector | Depth up to 30mm (AC110V) Depth up to 40mm (AC220V) |
Ambient Condition | -20°C~+60°C, Below 30-80%RH |
TC-75 2 in 1
Metal, Voltage
• The detector can test location of metal and electrified wire inside wall
• The detector will shine and sounds when the detector test metal or electrified wire.
Function | Measuring Range |
Metal Detector | Depth up to 25mm (Φ15mm steel pipe) |
VoltageDetector | Depth up to 30mm (AC110V) Depth up to 35mm (AC220V) |
Stud Detector | Depth up to 20mm |
Ambient Condition | -20°C~+60°C, Below 30-80%RH |
TC-78 3 in 1
Metal, Voltage,Stud
• The detector can test location of metal, wood and electrified wire inside wall
• The detector will shine and sounds when the detector test metal or electrified wire.
Q1: Can I have a sample for testing?
A: Yes, we can offer free sample, but you should afford the shipping cost.
Q2: Can I add my logo on the products?
A: Yes, OEM and ODM are available for us.
Q3: How can I get the after-service?
A: We will send you the free spare parts if the problems caused by us. If the products cannot be repaired, we will sendyou new free quantity together with next order.
Q4: Do you have inspection procedures for products?
A: our products100% self-inspection and testing before packing.
Q5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Here is our factory address: #7 Tongyi Industrial Area, Zhongshan City, Guzhen.
Our factory is near Guangzhou airport, and we can pick you up in the airport, Hotel booking service is available.
Q6: How about delivery time of the order?
A: 15-20 days after getting deposit.
Q7: How about payment terms?
A: 20%-30% deposit, the rest payment balance against B/L. If have regular order and good order quantity, we can give delay payment
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier