Specification of car dry spray paint booth with infrared lamps heater
Outside Size: | 7010 x 5260 x 3400 mm (L x W x H) | Inside Size: | 6900 x 3900 x 2650 mm (L x W x H) |
Foundation and Floor | Foundation | Full metal foundation, two rows flat steel grids and three rows metal non-slip diamond plates | |
Metal basement | 300mm height, the ventilation effect is better than traditional spray booth | ||
Drive-in Ramps | 2 units, each size: 2000x500 mm, diamond plate construction | ||
Wall and door | Wallboard and Roof Panel | Side wall panels adopt high quality double construction fireproof EPS insulation materials, thickness is 50mm, have function of fireproof and keeping warm. Roof panels adopt galvanized steel plate bending forming | |
3-Folded Entrance Door With Safety Glass Window | 1 set, size: 3000x2600 mm(B x H), size is bigger than traditional spray booth | ||
-Operator’s Door With Safety Glass Window | Big opening:700x2000mm (B x H),hand-made, tempering glass observation window | ||
Light System | Ceiling Lighting | 8units, each3×36w, total 864W | |
Side Lighting | No, optional | ||
Filtration System | Pre-filters | Grade G2 plate type fiber glass filter | |
Ceiling Filters | EU5 grade high efficient filter | ||
Bottom filter & exhaust filter | Fibreglass paint-stop filter | ||
Ventilation System | Inlet fan (Direct drive motor) | Adopt big impeller turbo fan, 5.5KW, 380V , 50HZ | |
Outlet fan (Direct drive motor) | No | ||
Fan Capacity | 20,000m³/h | ||
Air Flow Speed | 0.20 m/s in empty booth, 0.20-0.35m/s in loaded booth | ||
Heating System | Heating Exchanger | Infrared heating | |
Heating Exchange Capacity | 30KW | ||
Heating time | 6-8 minutes (from 20 to 60º) under baking status, max baking temperature is 80° | ||
Control Board | Control system | Standard control system | |
Function | Painting, warm painting, baking, lighting, emergency stop switch | ||
Total power | 37KW |
Company information:
HC Coating Equipment Manufacturing Co., Ltd. is an auto maintenance equipment company. Today it is a global player in the automotive aftermarket providing a full range of equipment and service solutions for workshops.
The core products in our company are spray painting and baking booth, portable spray booth, bus/truck spray paint booth, preparation station, mixing room, brake lathe, car bench and lifts. All our products are shipped to
Europe, East Europe, North & South America, Africa, Australia and Asia as well as different provinces in China.Our company is accredited to the internationally recognized quality standards of CE, ISO9001:2008.
Packaging & Shipping:
FAQ:
1.Are you a factory or a trading company?
we are a factory and all machines are produced at our own factory.
2.How long is the production?
Within 10 working days after receiving deposit.
3.What is the main product?
spray booth,,Auto body collision system, car repair machine, car lift,disc aligner and etc.
4.What's the warranty time?
One years with good after-sale service
5.I don't know how to assemble your spray booth?
The complex installation is already finished before delivery, what you need to
do is finishing the simple procedures according to the installation instructions.
6:Where is your factory located? How can I visit there?
Our factory is located in Huadu District, Guangzhou City, Guangdong Province, China, about 20 minutes by car from Baiyun international Airport. We welcome customers from all over the world!
7:When the product can be delivered?
Commonly the lead time will be within 5-7 working days after receiving 30% deposit by T/T.
Website:www.chnhc.com
Please send a inquiry below!