ceramic abec 9 3x10x4 bearing 623 micro ceramic bearing
Descriptions of ceramic ball bearing 623
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance,lubrication and maintenance free when working,especially high and low- temperature application .etc. could be used in awful environment and specially condition. The rings and balls made by full ceramic material:ZrO2, as a standard constructure, the cage made by PTFE, generally we also could make the cage with GFRPA66-25,PEEK,PI,AISISUS304,SUS316,Cu,etc.
Full ceramic (All -ceramic) bearing of ZrO2 material
Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working, especially high and low-temperature application,etc.Could be used in awful environment and specially condition. The rings and balls made by full ceramic material: ZrO2, as a standard constructure, the cage made by PTFE, generally we also could make the cage with GRPA66-25, PEEK, PI, AISI SUS304,SUS316,Cu,etc.
Specifications of dental ceramic ball bearing 623
623 Ceramic Ball Bearing Zirconia 3mm x10mm x4mm |
623 Ceramic Ball Bearing, the inner diameter is 3mm, outer diameter is 10mm and the width is 4mm, this is a popular size that could be used in many applications, Bearing is made of Ceramic.
|
Full ceramic (All -ceramic) bearing of Si3N4 material
Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material: Si3N4, as a standard constructure, the cage made by PTFE,generally we also could make the cage with GFRPA66-25, PEEK, PI, phonemic textiles tube, etc. Compares than the material of ZrO2. The SiN4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precision ceramic bearing which generally used in high-speed and high-rigidity spindle, the manufactured clearance could be P4 to up grade.
Full ceramic (All-ceramic) bearings fo full complement balls
Full ceramic bearing of full complement balls has an add-ball gap on its side. Because using no cage design, the bearing able to install more ceramic balls than the standard construction, so the heavier radial load ability increased more.resistance and high temperature application. This series of bearing is not for high speed choice, it should be to install on the unforced.
Full ceramic (All-ceramic) bearing of ceramic cage
Ceramic cage has excellence performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, ceramic bearing can be used in the most inclemency environments as corrosive,low temperature, high vacuum. The normal used ceramic materials with ZrO2.
Hybrid construction ceramic ball bearing
Ceramic ball especially Si3N4 have the following performance as low density, high strength, low friction coefficient, electrical and magnetism resistance, wear resistance, well rigidity, lubrication and maintenance free when working, it is the best choice for rollers(inner ring and outer ring are made by metal) of the hybird construction ceramic ball bearing which are used in high-speed,high accuracy and long life environments. Normally, GCr15 or AISI44C, 316 ,304 makes inner ring and outer ring; The ceramic ball can adopt ZrO2, Si3N4 or Sic.
Applications of dental ceramic ball bearing 623
Ceramic bearing wih high temperature resistance,Cold resistance,abrasion resistance,corrosion resistance,insulation,since gravity oil lubrication,high speed,etc.Can be used for extremely bad environment and the special conditions,can be widely used in
aviation,spaceflight,navigation,petroleum,chemical industry,automobile,electronics,matallurgical,power,textile,pumps,medical equipment,scientific research and defense,military and other fields,application of new material is high-tech products.Ceramic materials,zirconium oxide(Zr02),the azotized silicon carbide Si3N4(Six),three.Keep the PTFE,nItred,stainless steel or special aviation aluminum manufacturing,thus expanding the ceramic bearing applications
Model numbers of ceramic ball bearing
new modle |
old modle |
d |
D |
width |
Cr |
Cor |
grease |
oil |
(mm) |
(mm) |
(kN) |
(kN) |
(r/min) |
(r/min) |
|||
6207 |
207 |
35 |
72 |
17 |
25.7 |
15.4 |
9200 |
11000 |
6307 |
307 |
35 |
80 |
21 |
33.4 |
19.3 |
8500 |
10000 |
6407 |
407 |
35 |
100 |
25 |
55 |
31 |
7200 |
8600 |
61808 |
1000808 |
40 |
52 |
7 |
4.95 |
4.2 |
12000 |
14000 |
61908 |
1000908 |
40 |
62 |
12 |
13.7 |
9.95 |
11000 |
13000 |
16008 |
7000108 |
40 |
68 |
9 |
12.6 |
9.6 |
9000 |
11000 |
6008 |
108 |
40 |
68 |
15 |
17 |
11.8 |
9000 |
11000 |
6208 |
208 |
40 |
80 |
18 |
29.5 |
18 |
8000 |
10000 |
6308 |
308 |
40 |
90 |
23 |
40.8 |
24 |
7000 |
8500 |
6408 |
408 |
40 |
110 |
27 |
65.5 |
37.5 |
6300 |
8000 |
61809 |
1000809 |
45 |
58 |
7 |
6.4 |
5.6 |
9000 |
12000 |
61909 |
1000909 |
45 |
68 |
12 |
14.1 |
10.9 |
8500 |
11000 |
16009 |
7000109 |
45 |
75 |
10 |
15.6 |
12.2 |
8000 |
10000 |