BPL300 type pellet plant plans is a new production line for wood researched and developed by our company. The cardboard pellet plant is designed as convenient micro - moving pelleting device. It also called diy pellet plant or wood pellet machine. It is composed of crushing machine, scraper conveyor, vibrating screen, material bin, diy pellet plant and wood parcels screen machine. Because of the special design about ABC Machinery, the pellet plant plans process is more movable and easier for using than the traditional biomass pellet mill.
Pelletizing Unit | Parameters |
pellet diameter | 2.5 – 12mm |
Pellet density | 0.6-1.2 t/m3 |
Pelletizing Type | ZLSP-300B R | ZLSP-400B R | ZLSP-420B R |
Pelletizing Capacity | 250-350 kg/h for wood, 350-600 kg/h for feed |
Total power of the complete pellet plant plans | 41.25 KW |
Dimension | 3500mm*1960mm*3500mm |
There are 3 model mobile pellet mill for you. You can choose different type diy pellet plant for output you want.
The pellet plant plans is used for turning agricultural and forestry waste into solid fuel like biomass wood parcels, straw, rice husk and peanut shells. If you would like to purchase a automatic small pellet plant plans instead of a single biomass diy pellet plant, BPL300 type portable pellet plant is recommended.
The BPL300 diy pellet plant is specially designed for medium and small scale biomass pelleting production. The main equipments are hammer mill, cyclone separator, mix bin, screw feeder, ZLSP-300B R | ZLSP-400B R | ZLSP-420B R pelletizer machine, water box, vibrating screen, bucket conveyor, basis frame, and electric control cabinet. The pellet machine unit, turning biomass, wood, branches of trees, straw, and bamboo sawdust into biomass parcels, is used for mall office heating and family heating.
There are 15 hammers and 3 blades shaped as equilateral triangle on the machine. By changing different seats of the blades, the machine applies to breaking wood ,biomass, and feeding materials with the size of diameter less than 20mm. and the size of the broken materials can be 3-5 mm.
This unit is composed of a blower powered with 2.2kw,air pipe and cyclone separator. It conveys crushed material into the mixer and the inventory box. It is connected with vibrating screen with a semitransparent hosepipe and bucket conveyor to cool the pellets and collect the dust.
Its capacity is 1m with shell made by steel plate of 2.5mm thick. On the two sides of it are cabin windows to check and observe. The four blade paddle mixers are actuated by a motor powered by 0.75kw.the top material layer is 800mm high from the bottom.
Put the mixed material into the diy pellet plant, actuated by variable-frequency and variable-speed motor, powered of 0.18 kw, and its range of the frequency conversion is 30~60Hz.
Three types of portable pelleting mills were equipped. ZLSP-300B R | ZLSP-400B R | ZLSP-420B the moveable pelleting mill can make 0.4~0.6 tons of sawdust particles by using pure sawdust per hour. Connecting the water system can be used for adjusting the water content of mixing material. We can create pellets whose diameter is 6-12mm.
It is a gridding of 3.5*3.5 mm powered by 0.37kw.The size of the gridding can be changed according to your requirement. A hose pipe should be connected for collect the powder and dust.
It is powered by chains and the size of the scraper is 145mm. Every single unit is 2436mm long, 437mm wide, 484mm thick. The length and width of the conveyor can be extended by adding or connected extensive part. There are five located joints to easily adjust the length and angle of conveyor. Two hose pipe with 100mm long are connected to cool the particles.
It is used the electric components of Schneider, which is certificated by CE safety standard. The switch of emergency is equipped for operating more safer and simple.
The pellet plant plans produced by ABC machinery is better than other manufactures, because of: