Final products parameters
Item |
AVG |
MIN(Standard) |
Material Relevance |
Dried density(B06) |
650kg/m³ |
525kg/m³ |
65% |
Strength/m²(A3.5) |
5.6MPA |
5.4MPA |
86% |
Dried Shrinkage |
0.4mm/M |
0.60mm/M |
- |
Radiation |
0.3BQ/KG |
0.4BQ/KG |
- |
Low temperature resistance |
Weight loss |
Strength |
- |
≤2.5%(qualified) |
≥5.0MPA(qualified) |
- |
|
Size of products |
Length(mm) |
Width(mm) |
Height(mm) |
600mm |
100/120/200/240/300 |
100/120/200/240/300 |
Items |
Table of capacity |
||||||
Mould |
Capacity |
Loading Speed |
Mixing Speed |
Lanes |
10H/D(M³) |
25D/Month(M³) |
300D/year(M³) |
QT-P-50 |
50 |
2-4min |
1 |
50 |
1250 |
15000 |
|
QT-C-50 |
50 |
2-4min |
8min |
1 |
50 |
1250 |
15000 |
QT-P-100 |
100 |
1.5-3min |
5min |
1 |
100 |
2500 |
30000 |
QT-C-100 |
100 |
1.5-3min |
5min |
1 |
100 |
2500 |
30000 |
QT-P-200 |
200 |
1.5-3min |
5min |
2 |
200 |
5000 |
60000 |
QT-C-200 |
200 |
1.5-3min |
5min |
2 |
200 |
5000 |
60000 |
1.35 years experience focusing on the AAC/CLC R&D
2.we are the only 1 full process service provider & equipment manufacturer in China.
3.3 years warranty ,and offer local assembling training
4.7*24 online service for helping any problem on installation,operation and management of your business
1. how is the quality of the final aerated blocks produced by your machine?
According to the different raw materials and formulas, the compressive strength of the bricks produced by our equipment is between 2.5-4.7N/mm². The exclusive formula will be provided based on the material you will choose before the purchase ends.
2. what kinds of NON-AAC block-making machines do you provide?
Based on the different techniques of foaming we produce chemical type and physical type.
Based on the different capacities you will need, we produce the following basic type: QT-C-50; QT-C-100; QT-C-200; QT-P-50; QT-P-100; QT-P-200; Daily output ranges from 50 cubic meters to 200 cubic meters or more.
3, What are the advantages of autoclaved aerated block production equipment compared with traditional autoclaved equipment?
√60-90% investment cost savings, because we use the developed formula to replace the boiler autoclave.
√ There is no exhaust gas, wastewater, solid waste discharge, and the energy-saving rate is more than 50%.
√The minimal site, labor requirements, and high production efficiency. The daily output of 100 party lines is only 4-5 people, with no heavy physical and hazardous work.
√No specific production environment is required. Normal temperature and pressure can guarantee product quality.