biomass sawdust pellet burner boiler price for sale
biomass sawdust pellet burner boiler price for sale
| Conditions of Use | Contact us |
- The biomass burning machine needs to work under negative pressure. At the same time, the ID fan must be installed to ensure the negative pressure. If it is applied to aluminum melting furnace, greenhouse heating, drying room and other working conditions, it can be operated at slightly positive pressure. However, it is necessary to ensure the smooth flow of the flue; the cross-sectional area of the exhaust outlet and the power of the induced draft fan will be carried out according to the requirements specified by the engineering department of our company.
- The use environment of biomass burning machine must be well ventilated, and there are enough installation positions and operating positions. There must be no obstructions in the direction of the furnace door to affect the cleaning operation, and the distance from the wall should be at least 1.5 times the diameter of the furnace.
- When using the burner, two 2KG dry powder fire extinguishers must be equipped within 5 meters of the burner.
- It must be equipped with a special operator to operate, the operator must be guided by the machine can operate the machine. (5)If the product is used in a boiler, it should be submitted to a qualified boiler installation company for installation. If there is a size deviation due to the size of the burner mouthpiece, the size of the boiler's crater must be corrected. The product must be reported to the local boiler inspection office for approval. Qualified boiler maintenance unit.
| Technical Data | Contact us |
| Model | Heat(kcal/h) | Power(kw) | Fuel(kg) | Overall Size(mm) | Weight (ton) |
YHBL45 | 45 | 2.05 | 100 | 1900×850×2100 | 0.96 |
YHBL90 | 90 | 3.75 | 200 | 2280×920×1850 | 1.5 |
YHBL120 | 120 | 3.75 | 266 | 2450×1020×1980 | 1.86 |
YHBL180 | 180 | 7 | 400 | 2700×1190×2100 | 2.64 |
YHBL240 | 240 | 8.2 | 533 | 3050×1400×2300 | 3.1 |
YHBL300 | 300 | 8.6 | 667 | 3200×1600×2600 | 4.3 |
YHBL360 | 360 | 10 | 800 | 3850×1785×2720 | 4.8 |
YHBL420 | 420 | 12 | 933 | 4150×1900×2800 | 5.1 |
YHBL480 | 480 | 14 | 1066 | 4460×2068×2900 | 5.65 |
Biomass pellet fuel is a cigarette produced by straw, straw, wood chips, wood blocks, peanut shells, hibiscus, cotton rods, furniture factory waste, dregs, palm, bark, domestic garbage, etc. Processed by biomass pellet machine. Environmentally friendly new fuel. Specific characteristics of smokeless dust, zero carbon emissions, and environmental protection. At present, the pellet market is in short supply and is very popular.
| The Parts of Biomass Burner | Contact us |
- Hopper: used to store biomass pellets.
- Main body of vaporization chamber: biomass particle fuel gasification in gasification chamber
- Fire mouth (fire mouth): divided into inner tube and outer tube, the inner tube emits combustion gas.
- Grate: The middle position of the door of the vaporization chamber, used for air distribution when the particles are burned and vaporized.
- Ash door: The burner must open the door every 2-8 hours of work to clean the ash on the grate. When opening the door, be sure to stop the blower for more than 10 minutes and stand on the side of the door and keep it for more than 2 meters. The safe distance, after the blower stops running, open with a long iron. There is no flame and the combustible gas can be ejected before the door can be cleaned.
- Blower: Distribution of air for combustion and gasification.
- Wind box: used to adjust the air volume and air pressure.
- Bottom wind: From the bottom of the grate.
- Secondary air: Mezzanine distribution between the inner and outer tubes of the fire vent, and the secondary combustion of combustible gas in the combustion flaring.
- Feeding motor: screw rod used to drive feeding system.
- Feeding system: Feed biomass pellets into the combustion chamber.
- Casters: For short-distance movement of the burner (use a forklift away from the distance to avoid damage to the rigid vibrating refractory layer).
- Fuel: Pure woody biomass pellet fuel, diameter 8-10MM, length less than 30mm, heating value above 3500KCal, ash content less than 3% (large tonnage burner can burn 30MM biomass briquette fuel).
Wood pellet burner application field:
Wood pellet burners are widely used in boilers, die casting machines, industrial furnaces, incinerators, melting furnaces, kitchen equipment, drying equipment, food drying equipment, ironing equipment, baking equipment, road construction machinery, industrial annealing furnaces, Various thermal industries such as asphalt heating equipment.
The current pellet fuel market is in short supply. Now, the national boiler reform does not allow coal to be burned. It is the most environmentally friendly way to replace coal with biomass pellets. Biomass pellets The market prospects for the new energy industry are very broad.
We will send the products on time according to the requirements of customers.
Usually using wooden box package,can be packaged according to customer requirements
Pre-sale Service:
1. We will introduce the most suitable machine to clients.
2. We offer details explanation for customer in each step.
3. Design suitable product, offer the reasonable consultation.
After-sale Service:
1. We sent engineer install abroad & training worker.
Necessary training about machine daily maintenance to local workers is provided also.
2. Offer free technical support any time. We have perfect after-sales service system and team with professional for whole using life.
3. Training how to instal the machine, training how to use the machine.
4. Welcome customer come to our factory.
| Related Products | Contact us |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier