big air inflatable human bubble ball ,inflatable zorb ball for bowling best seller W1017

ZORB Globe Riding, Zorb Ball Manufacturer

Item No. W1017

Size: 3m Outer Diameter x 2m Inner Diameter
Material 1). 0.8mm PVC
Weight: 58KG     Packing: 80x58x58cm
Material 2). 1.0mm PVC
Weight: 65KG  Packing: 90x60x60cm
Material 3). 0.8mm TPU
Weight: 58KG     Packing: 80x58x58cm
Material 4). 1.0mm TPU
Weight: 65KG   Packing: 90x60x60cm

Blower (CE 220v-240v/110v-120v): as required

Frequently Asked Questions:

Q: What is Zorb?
A: Zorbing (globe-riding, sphereing, orbing) is the recreation of rolling downhill in an orb, generally made of transparent plastic. Zorbing is generally performed on a gentle slope, but can also be done on a level surface, permitting more rider control. In the absence of hills some operators have constructed inflatable, wooden or metal ramps. There are two types of orbs, harnessed and non-harnessed. Non-harness orbs carry up to three riders, while the harness orbs are constructed for one to two riders. Double-harness spheres have different slope requirements, and must only be operated in specific locations. The longer runs are approximately half a mile.

Q: More structure details on Zorbs?
A: The zorb is double-sectioned, with one ball inside the other with an air layer between. This acts as a shock absorber for the rider, damping bumps while traveling. Orbs are lightweight and made of flexible plastic, as opposed to the rigid plastic, for example, of a hamster ball. Many orbs have straps to hold the rider in place, while others leave the rider free to walk the orb around or be tossed about freely by the rolling motion - water can be added inside, and this is commonly called a "water or aqua ride". A typical orb is about 3 metres (9.8 ft) in diameter, with an inner orb size of about 2 metres (6 ft 6.7 in), leaving a 50–60 centimetre (20–24 in) air cushion around the riders. The plastic is generally 0.8mm to 1.0mm thick. The inner and outer orb are connected by numerous (often hundreds) small ropes. Orbs have one or two tunnel-like entrances.

Q: Why TPU more expensive than PVC?
A: TPU is better than PVC mainly by following features:
1). excellent abrasion resistance
2). outstanding low-temperature performance
3). excellent mechanical properties, combined with a rubber-like elasticity
4). very good tear strength
5). high elasticity& transparency
6). good oil and grease resistance
7). more mycete-proof

Q: Zorbing safety rules?
A: To ensure safe Zorbing play for all, please follow these Safety Rules:
1. Use the Zorb only under mature, knowledgeable supervision.
2. Inspect the Zorb before each use. This includes the air deflation. Tears in the Zorb can quickly grow and become un-repairable if continually used.
3. DO NOT allow more than Two person in the Zorb at a time.
4. DO NOT attempt stunts. Somersaults and other dangerous maneuvers can cause serious injury or death. If you wish to take your Zorbing skills further, consider joining a local club.
5. DO NOT jump off the Zorb. Always climb on and off the Zorb.
6. Avoid Loose harness while riding.
7. DO NOT use your Zorb when feeling ill, tired, when using medication or under influence of alcohol.
8. Protect your Zorb from unsupervised use.
9. Only use Zorb when the air pressure is accurate.
10. Read the manufacturers instructions before using the Zorb.

Q: What happens if the ball punctures?
A: If the ball punctures there is no reason to panic.Small and large holes or tears can easily be patched and sealed. If there is a leak in the ball simply signal the instructor and you are pulled ashore. The ball will not sink unless it is completely destroyed.
The ball can easily be patched with patching equipment (repair kit) in your order from us.

1. Custom Designs available for different branding, strings, entrances, handles, harness, cushions, valve, zipper.
2. Material: 0.8-1.0mm PVC or TPU, Abrasion Resistance, Outstanding Flexibility, Lead free, Waterproof, Fireproof.
3. Professional Machines for Cutting, Welding and Printings to ensure quality.
4. Certificate& Standards: CE; BS EN14960; AS3533.4.1; ASTM; EN71
4. Each product includes Air Pump and Repair Kit (glue, same colour materials).
5. Air Pumps are CE approved in 110v-120v or 220v-240v with various kinds of plugs.
6. Durable Zippers (with lubricant) for water balls.
7. Shipping: by sea, by air or by express (DHL, UPS, Fedex, TNT, EMS, etc.)
8. Glue and lubricant can only be shipped by sea.
9. Strong packing bag and export carton for transport and reuse.
10. MOQ: 1 piece
11. Payment: T/T (bank wire transfer), L/C, Western Union, Money Gram, Pay.pal, Escrow with 30% deposit.

Airholics zorb balls are widely used for:

Parties and Events
Festivals and Carnivals
Schools and Daycares
Hotels and Amusement Parks
Corporate Picnics and Functions
Grand Openings and Promotions

Note: Due to constant product development and improvement, artwork, shape, colour, size,
description and schematic that appear on price list may not reflect the latest changes.

Order steps:
1). Please choose which items you need, order quantity and all specific requirements if you have.
2). We will give you best price with details.
3). If you confirm the order, we will make Proforma Invoice with order and payment details.
4). We will start production upon receipt of 30% deposit.
5). We will do quality inspection and take photos for your confirmation to check if any modification is required.
6). We will make/release shipment and send you shipping documents upon receipt of the rest payment.

Please contact for latest price and details! All emails will be answered within 1 business day. If you do not receive our reply, please re-send or call us directly.

Thank you,

AIRHOLICS LIMITED
Tel: 86-592-7100766
Skype ID: sales_9804
Address: No. 502 Jianyi Building, Huli Industrial Park, Xiamen, Fujian, China
Branch Factory: No. 7 She Industrial Park, Shijing, Baiyun Disctrict, Guangzhou, China