1.wide flange, high lateral stiffness.
2.H beam has good bending resistance, about 5%-10% better than i-bar.
3.the two surfaces of flange are parallel to each other, which makes connection, processing and installation easy.
4.compared with welding i-steel, H beam is low cost, high precision, small residual stress, no need for expensive welding materials and weld inspection, saving about 30% of the production cost of steel structure.
5.under the same section load, the weight of hot-rolled H beam steel structure can be reduced by 15%-20% compared with traditional steel structure.
6.compared with concrete structure, hot-rolled H beam steel structure can increase the usable area by 6%, reduce the dead weight by 20%-30%, and reduce the internal force of structure design.
7.H beam can be processed into T beam, honeycomb beam can be combined to form a variety of sections, greatly meet the needs of engineering design and production.
Size |
100*50-700*300mm |
Web Thickness |
5-16mm |
Web Width |
50--300mm |
Flange Thickness |
4.5-23mm |
Flange Width |
50-400mm |
Steel Grade |
G300 G350 S275JR S355JR,SS400,ASTM36,S235jr,S235jo, Q235B and Q345B etc. |
Standard |
ASTM, ANSI, GB, DIN, JIS, EN, ISO. |
Surface Treatment |
Hot Dip Galvanized, Painting or Black. |
Length |
1-12m or as customer request |
Technique |
Hot rolled/Cold Rolled/Galvanized |
Custom services |
Cutting-Punching-Drilling |
Packing |
By bundles with steel strips or as customer request |
Delivery Time |
15 days after receive advance payment or L/C |
Application |
Mechanical&manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis. |
Product size
Product Show
1. in bulk
2.in hexagonal bundles by steel strips only
3. in bundles by steel strips then packed by water-proof plastic wraps