12V(3S)lithium battery protection specifications | 12V(3S)lithium battery protection specifications | |||||
Model:SDA158-0310A00001B(3S) | ||||||
No. | test project | test results | ||||
1 | Voltage | charge voltage | DC:12.6V CC/CV | |||
bleed point | -- | |||||
2 | Current | bleed current | -- | |||
sleep current | ≤50μA | |||||
sustained charge current | 10A | |||||
sustained discharge current | 18±3A | |||||
3 | Over-Charge Voltage Protection(Simpie Link) | overcharge detection voltage | 4.25±0.025V | |||
overcharge detection delay time | 0.5S—1.5S | |||||
overcharge recovery voltage | 4.15±0.05V | |||||
4 | Over-Discharge Voltage Protection(Simpie Link) | overdischarge detection voltage | 2.70±0.08V | |||
overdischarge detection delay time | 0.5S—1.5S | |||||
overdischarge recovery voltage | 3.00±0.1V | |||||
5 | Over-Current Protection 1 | over-current charge detection | 18±3A | |||
over-current charge detection delay time | 0.5~1.8S | |||||
recovery mode | Disconnect load,automatic recovery | |||||
6 | Over-Current Protection 2 | Over-current discharge detection | 40±5A | |||
over-current discharge detection delay time | 50ms—180ms | |||||
recovery mode | Disconnect load,automatic recovery | |||||
7 | Short Crcuit Current Protection | detection state | external short circuit | |||
detection delay time | 150-350us | |||||
recovery mode | Disconnect load,automatic recovery | |||||
8 | resistence | (MOSFET) protective line | ≤50mΩ | |||
9 | Temperature | The range of operating temperature | -20~+60℃ | |||
Size | The size of the board SDA158-0310A00001B | 48*62.5*1mm |