ET54 series single/double channel programmable dc electronic load, USES the high performance chip, high speed, high precision design, provide 1mV,1mA resolution, superior performance, can be widely applied to the charger, switching power supply, linear power supply, production test of all kinds of batteries and other industries, scientific research institutions such asthe test research and development.
2.8-inch TFT LCD display, rich display content, support Chinese and English display;
Simple and convenient operation process, with intuitive interface display system, easy to use;
It has the function of key lock to prevent misoperation.
The basic measurement modes of CC, CV, CR, CP, CC+CV, CR+CV are provided.
Provide professional battery test and LED test;
Dynamic test mode, can test the dynamic power output performance;
Scanning test mode can test the continuity of power output within a certain range.
List mode, which can simulate various loaded state changes;
Short circuit test for simulating load short circuit;
The measurement model of the far end can improve the measurement accuracy when the current is high.
Support external trigger input;
Built-in buzzer alarm;
Power off to maintain data storage function;
Remote operation can be carried out through RS-232 interface and USB Device interface.
With PS2 interface, support external keypad to set data values;
Main technical indicators:
Model |
ET5410 |
ET5420 |
ET5411 |
||||
channel NO. |
Single channel |
double channel |
Single channel |
||||
Rated input |
power |
400W |
400W |
400W |
|||
input voltage |
0-150V |
0-150V |
0-500V |
||||
Input current |
0-40A |
0-20A×2 |
0-15A |
||||
Constant voltage
|
range |
0.1~19.999V |
0.1~19.999V |
||||
Resolution |
1mV |
||||||
accuracy |
±(0.05%+0.02%FS) |
||||||
Constant current |
range |
0~3.000A |
0~3.000A |
0~3.000A |
|||
Resolution |
1mA |
||||||
accuracy |
±(0.05%+0.05%FS) |
||||||
Constant resistance |
range |
0.05Ω~10Ω |
|||||
Resolution |
16bit |
||||||
accuracy |
±(0.1%+0.8%FS) |
||||||
Constant power |
range |
0~400W |
|||||
Resolution |
10mW |
||||||
accuracy |
±(0.1%+0.1%FS) |
||||||
Dynamic test function |
model |
CC |
|||||
T1&T2 |
50μs~3600s;Resolution:1μs |
||||||
accuracy |
0.1%+5μs |
||||||
Up/down Rate |
0.000~0.3A/μs(current 0~3.000A) |
||||||
Battery test function |
Voltage range |
0~120V |
|||||
Discharge capacity |
240Ah |
||||||
Resolution |
1mA |
||||||
Test time |
1s~16h |
||||||
Measuring range |
|||||||
Voltage readback |
range |
0~19.999V |
0 ~500.00V |
||||
Resolution |
1mV |
10mV |
|||||
accuracy |
±(0.05%+0.1%FS) |
||||||
Current readback |
range |
0~3.000A |
0~3.000A |
0~3.000A |
|||
Resolution |
1mA |
||||||
accuracy |
±(0.05%+0.1%FS) |
||||||
Power readback |
range |
400W |
|||||
Resolution |
10mW |
||||||
accuracy |
±(0.1%+0.1%FS) |
||||||
Scope of protection |
|||||||
Over voltage protection |
> 150V Cut off |
> 500V Cut off |
|||||
Over current protection |
> 40ACut off |
> 20A Cut off |
> 15A Cut off |
||||
Overpower protection |
400W |
||||||
Over temperature protection |
85℃ |
||||||
short circuit protection
|
current(CC) |
3A |
3A |
3A |
|
|
|
voltage(CV) |
0V |
|
|
||||
resistance(CR) |
40mΩ |
|
|