Welcome to TradeChina
automotive battery all sizes N80 lead acid dry charged car battery 12v 80ah china auto battery for starting
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
automotive battery all sizes N80 lead acid dry charged car battery 12v 80ah china auto battery for starting
Product Description
Bosfa car-battery series
1.Bosfa car batteries provide enough power to start the car no matter what weather is like (high or low temperature) and the life of this batter is more than longer than the mixture of high and low Antimony .
2.Excellent performance of Lead calcium alloy plates: stable ,high electricity efficiency and corrosion.
positive plate :high density and charge longer, self charge a little , idling operation ,more durable to charge and discharge than general batteries ,strong resistance of gas evaporation and overheating.
3.Special plate bar materials and manufacture the crafts to make batter to resist in bumping and quaking. protect acid from overflowing and discharging acid gas everywhere. long life ,low replacement rate ,reducing environmental pollution.
Product Instruction for dry charged car battery
Preparation
1. Please read this manual carefully. The battery storage and use must be away from fire or spark. Make sure the firm connection to avoid spark and explosion when you install the battery into vehicle.
2. Pay attention to the safety, because the electrolyte has corrosion. If the electrolyte get on skin, eyes or clothes, please
flush with clean water completely, and get medical treatment immediately.
3. Before using, make sure the caps is screwed tightly and keep the aluminum foil sealed to avoid humidity.
Filling Acid
1, Unscrew the caps or remove the aluminum foil.
2, Fill the battery with electrolyte, make sure the liquid level reach the place between upper level and lower level which
indicated on case, or keep the liquid level over the plates 10-15mm. The specific density of electrolyte is (1.275~1.285g/cm3(20℃)
3, After filling, wait for 20 minutes. if the liquid level can’t reach the lower level or can’t over the plates 10~15 mm. Please
complement electrolyte
4, The battery can be installed for use when the voltage≥12.6V, please charge it if lower than 12.6V.
Installation
1. Put the battery into vehicle and fix it.
2. First, connect the positive cable to the positive terminal, and then connect the negative cable to the negative terminal.
3. Keep battery body and terminals clean.
Charging
1. After filling electrolyte with density of 1.275~1.285g/cm3(20℃), wait for 20 minutes then battery can be used. However, to make the battery perform better, we recommend complementary charge.
2. Charge the battery with 0.1℃ for 5-6 hours. The Voltage should be ≥12.6V, otherwise it have to be charged one more time.
3. If charge a group of batteries, the batteries should be the same item. Otherwise, use the smallest capacity battery as standard for charging. The higher capacity battery needs more time for charging. Don’t charge batteries by parallel connection.
4. When the electrolyte temperature reach 45℃ or charging is over, but the electrolyte density can’t reach 1.275~1.285g/cm3(20℃), please keep charging the battery with 50% current until it is full charged.
5. If the liquid level low down after charge, please add distilled water to reach the level requested.
6. Screw the caps tightly when the battery is charged, and clean the body by distilled water.
Maintenance
1. Check the liquid level monthly. If it is lower than requested level, fill with distilled water to reach it. Don’t fill with
sulfuric acid or unclean water.
2. If the vehicle don’t start more than one month, the battery should be got out and complement charge every tow months.
3. Don’t over charge the battery. Avoid charging battery by big current for long time.
4, Stop using the battery and charge immediately when the electrolyte density is lower than 1.175g/ cm3
Storage
1. Don’t remove the aluminum foil till using or selling the battery to avoid bad influence on performance.
2. Forbid inversion and collision during battery storage to avoid damage.
3. Don’t put the battery in acidity and alkaline condition to avoid corrosion.
4, Battery which have acid in it or be used, must be charged before long term storage, and must be recharging per month.
2, Keep battery clean and can not put any metal goods on the top of it.
3, We recommend storing the battery in clean, dry, ventilated location. Avoid direct exposure to heat sources, sunlight or space heaters. The best temperatures for battery storage is 5-40℃ ,Temperatures above℃ accelerate the battery's self-discharge characteristics.
4, This battery is dry charged battery, capacity range 28AH from 225AH, be produced strictly according to JIS standard. Be used for vehicle start. Not suitable for DC wiring and lighting.
1.Bosfa car batteries provide enough power to start the car no matter what weather is like (high or low temperature) and the life of this batter is more than longer than the mixture of high and low Antimony .
2.Excellent performance of Lead calcium alloy plates: stable ,high electricity efficiency and corrosion.
positive plate :high density and charge longer, self charge a little , idling operation ,more durable to charge and discharge than general batteries ,strong resistance of gas evaporation and overheating.
3.Special plate bar materials and manufacture the crafts to make batter to resist in bumping and quaking. protect acid from overflowing and discharging acid gas everywhere. long life ,low replacement rate ,reducing environmental pollution.
Product Instruction for dry charged car battery
Preparation
1. Please read this manual carefully. The battery storage and use must be away from fire or spark. Make sure the firm connection to avoid spark and explosion when you install the battery into vehicle.
2. Pay attention to the safety, because the electrolyte has corrosion. If the electrolyte get on skin, eyes or clothes, please
flush with clean water completely, and get medical treatment immediately.
3. Before using, make sure the caps is screwed tightly and keep the aluminum foil sealed to avoid humidity.
Filling Acid
1, Unscrew the caps or remove the aluminum foil.
2, Fill the battery with electrolyte, make sure the liquid level reach the place between upper level and lower level which
indicated on case, or keep the liquid level over the plates 10-15mm. The specific density of electrolyte is (1.275~1.285g/cm3(20℃)
3, After filling, wait for 20 minutes. if the liquid level can’t reach the lower level or can’t over the plates 10~15 mm. Please
complement electrolyte
4, The battery can be installed for use when the voltage≥12.6V, please charge it if lower than 12.6V.
Installation
1. Put the battery into vehicle and fix it.
2. First, connect the positive cable to the positive terminal, and then connect the negative cable to the negative terminal.
3. Keep battery body and terminals clean.
Charging
1. After filling electrolyte with density of 1.275~1.285g/cm3(20℃), wait for 20 minutes then battery can be used. However, to make the battery perform better, we recommend complementary charge.
2. Charge the battery with 0.1℃ for 5-6 hours. The Voltage should be ≥12.6V, otherwise it have to be charged one more time.
3. If charge a group of batteries, the batteries should be the same item. Otherwise, use the smallest capacity battery as standard for charging. The higher capacity battery needs more time for charging. Don’t charge batteries by parallel connection.
4. When the electrolyte temperature reach 45℃ or charging is over, but the electrolyte density can’t reach 1.275~1.285g/cm3(20℃), please keep charging the battery with 50% current until it is full charged.
5. If the liquid level low down after charge, please add distilled water to reach the level requested.
6. Screw the caps tightly when the battery is charged, and clean the body by distilled water.
Maintenance
1. Check the liquid level monthly. If it is lower than requested level, fill with distilled water to reach it. Don’t fill with
sulfuric acid or unclean water.
2. If the vehicle don’t start more than one month, the battery should be got out and complement charge every tow months.
3. Don’t over charge the battery. Avoid charging battery by big current for long time.
4, Stop using the battery and charge immediately when the electrolyte density is lower than 1.175g/ cm3
Storage
1. Don’t remove the aluminum foil till using or selling the battery to avoid bad influence on performance.
2. Forbid inversion and collision during battery storage to avoid damage.
3. Don’t put the battery in acidity and alkaline condition to avoid corrosion.
4, Battery which have acid in it or be used, must be charged before long term storage, and must be recharging per month.
2, Keep battery clean and can not put any metal goods on the top of it.
3, We recommend storing the battery in clean, dry, ventilated location. Avoid direct exposure to heat sources, sunlight or space heaters. The best temperatures for battery storage is 5-40℃ ,Temperatures above℃ accelerate the battery's self-discharge characteristics.
4, This battery is dry charged battery, capacity range 28AH from 225AH, be produced strictly according to JIS standard. Be used for vehicle start. Not suitable for DC wiring and lighting.
Specification
Model | N80 |
Nominal Voltage | 12V |
Nominal Capacity | 80Ah |
Size | L306xW173xH230mm |
Weight | 10.5KG |
Separator | PVC |
Standard | Japan |
CCA | 500A |
Why Choose Us
Company Profie
Production Process & Packing
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
FAQ
Q1.What is your delivery time(lead time)?
A: Usually our lead time is 15-20days. It can be shorter if your request is stock products. It depends on the specific model and quantity of your order.
Q2: What is your payment term?
A: We prefer the payment term by T/T, 30% deposit and 70% balance before shipping. Other payment terms can be negotiated according to your order.
Q3: What will be the packing way?
A: The packing will be seaworthy packaging: paper carton + wooden pallet or wooden box.
Q4: Can i have the products with my own brand and logo?
A: Yes, we can offer OEM service.
Q5. How will you ship the goods if i buy from you?
A: For bulk orders, we will arrange the shipment by sea. If you need them urgent, we will try air freight.
A: Usually our lead time is 15-20days. It can be shorter if your request is stock products. It depends on the specific model and quantity of your order.
Q2: What is your payment term?
A: We prefer the payment term by T/T, 30% deposit and 70% balance before shipping. Other payment terms can be negotiated according to your order.
Q3: What will be the packing way?
A: The packing will be seaworthy packaging: paper carton + wooden pallet or wooden box.
Q4: Can i have the products with my own brand and logo?
A: Yes, we can offer OEM service.
Q5. How will you ship the goods if i buy from you?
A: For bulk orders, we will arrange the shipment by sea. If you need them urgent, we will try air freight.
Q6. Can we get samples before bulk orders?
A: Yes, samples are available. You pay for the samples and shipping first, we will return that amount back when you place bulk orders.
Contact Us
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier