Solid content (%) | ≥50 |
Fineness (μm) | ≤40 |
Surface drying | About half an hour (25℃ ) |
Complete curing | 1 days(25℃) |
Impact strength (cm) | ≥50 |
Flexibility | ≤1 |
Surface treatment | All surfaces to be coated shall be clean, dry and free of pollution. All surfaces shall be evaluated and processed according to ISO8504:1992 standard, and the grease shall be removed according to the requirements of SSPC-SP1 solvent cleaning standard. |
Precautions | When applying the product with a brush or roller, it may be necessary to apply more times to get the designated dry film thickness. Avoid coating too thick, wet film thickness should not exceed 150μm. |
Low temperature curing: This product is a water system. It is not suitable for low temperature environment. It is not recommended to construct when the temperature is below 10℃ . Because when the temperature is below 10℃ , the product cannot be fully solidified; when the temperature is below 0℃ , the product will freeze, and cannot be used. |