angle ethylene oxide sterilizer chamber eo gas sterilizer manufacturer

angle ethylene oxide sterilizer chamber eo gas sterilizer manufacturer 

The principle of ethylene oxide sterilizer: The sterilization mechanism of ethylene oxide is through its non-specific alkylation with microorganisms, thereby inhibiting the normal function of the reaction group of microorganisms, and causing the death of metabolism.

Ethylene oxide is a broad-spectrum sterilant that can kill a variety of microorganisms at room temperature, including spores, tubercle bacilli, bacteria, viruses, and fungi.

Application: Hysteroscopy, Laparoscopy, Laryngoscope, Probe, Rigid Endoscope, Hose Endoscope, Ophthalmic Lens, Fiber Optic Cable, Cranial Pressure Sensor, Cold Therapy Probe, Prostatectomy Device, Esophageal Dilator, Electrocautery Devices, defibrillation electrodes, laser head metal, glass, silicone, Chinese medicine and western medicine, human implants, masks, DNA, etc.

Sterilization time

Technical characteristics 

 HTY series ethylene oxide sterilizer is a special equipment for low-temperature fumigation and sterilization of articles sealed in the sterilization room under a certain temperature, pressure, humidity and a certain action time with the mixture of pure ethylene oxide and ethylene oxide. Ethylene oxide gas is a very active chemical disinfectant, which can not only achieve broad-spectrum sterilization, but also achieve a reliable sterilization effect.

Advantages

Simple operation: one-button operation, microcomputer control, simple and convenient, digital display of sterilization process.

Print records: Record and print sterilization information for sterilization process, which is convenient for verification and archiving.

Filtration system: The air inlet is equipped with a filtration system, which can effectively filter out germs and microorganisms and avoid secondary pollution during exhaustion. 

(1)Installation requirements of ethylene oxide sterilizer:

1)The ethylene oxide sterilizer must be placed in a well-ventilated place, and it must not be placed near a fire source.

2)In order to facilitate repair and regular maintenance, 51cm space should be reserved on each side (including the top) of the ethylene oxide sterilizer.

3)Special exhaust pipes should be installed and completely isolated from other exhaust pipes of the building.

(2)Ethylene oxide safety protection principles and precautions:

1) Keep ethylene oxide sterilizers and cylinders or cans away from sources of ignition and static electricity.

2) Ethylene oxide storage should be free of ignition sources, no rotating motor, no sun, good ventilation, and the temperature is lower than 40 ℃, but it should not be placed in the refrigerator. Dispose of in strict accordance with the relevant national storage requirements for flammable and explosive materials.

3) Do not use too much force when administering or opening the bottle, so as not to spray the liquid.

4)Monitor the air concentration of the ethylene oxide working environment every year.

5)Ethylene oxide staff should be trained in expertise and emergency management.