AAC Plant Equipment Product AAC Wall Panel Building Block is a kind of new building materials with light porous. With siliceous materials (sand, cement ,lime) as the main raw material, adding gas agent (aluminum) made of lightweight porous silicate products.
Due to its uniform after gas contains a lot of tiny pores. It can be made into different specifications of the block,panel and insulation products, widely used in industrial and civil construction of bearing or retaining fill structure.
AAC Plant Equipment Product AAC Wall Panel Building Block Details
AAC Plant Equipment Product AAC Wall Panel Building Block Advantages
As lots of hollows, AAC has the scalability. And construction main body is to rely on reinforced concrete structure as a support, blocks only fill the role. When the earthquake struck, reinforced concrete structure will be deformation. Buildings with light materials masonry, greatly reduce the horizontal thrust produced by the building when the earthquake.If it is a solid brick, deformation of reinforced concrete structures, the backlog is no scaling, burst, play down.
Sound insulation:
The internal structure of aerated concrete is likes bread. A large number of closed pores evenly distributed. So it is of general building materials do not have sound-absorbing performance.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Density of some common building material is as follows:
Type |
AAC blocks |
Solid clay Blocks | Hollow Blocks | Ceramsite Concrete Blocks | Normal Concrete Blocks |
Density(kg/m3) | 400-700 | 1600-1800 | 900-1700 | 1400-1800 | 2000-2400 |
The coefficient of thermal conductivity of aerated concrete is 1/6 of the normal concrete, heat insulation performance is better than the 240 mm thick clay brick wall greatly. when temperature is under 600 degrees, aerated concrete’s compreessive strength has a slight growth. As the temperature at 600 degrees or so, its compressive strength is close to room temperature compressive strength.
AAC Plant Equipment Product AAC Wall Panel Building Block has good process ability. It can be nail,cut, plane, milling, drilling. It brings the construction great convenience and flexibility.
AAC Plant Equipment Product AAC Wall Panel Building Block Specifications:
Length(mm) | 1800-6000 |
Width(mm) | 600 |
Height(mm) | 75,100,120,125,150,175,200, 250, 300, 400 |
Donyue ALC panels can be widely used, it can be used as external wall, internal wall, partition wall,roof,floor and curtain wall etc. It also can be used in various kinds of buildings ,such as public facilities, industrial constructions, civil housings, hospitals,apartments, villas, schools, stores, supermarkets etc.
Exterior panel specification:
Specification (mm) |
Grade | Interface | Strength grade (MPa) |
Min design load (Kn/m2) |
Measured dry density (Kg/m3) |
≤3600×600×100 | B05 | T shape | 3.5 | ≥1.2 | 486 |
≤4200×600×125 | B05 | T shape | 3.5 | ≥1.2 | 486 |
≤5200×600×150 | B05 | T shape | 3.5 | ≥1.2 | 486 |
≤6000×600×175 | B05 | T shape | 3.5 | ≥1.2 | 486 |
≤6000×600×200 | B05 | T shape | 3.5 | ≥1.2 | 486 |
Interior panel specification:
Specification (mm) |
Grade | Interface | Strength grade (MPa) |
Measured dry density (Kg/m3) |
≤ 3000×600×75 | B05 | T/Flat shape | 3.5 | 486 |
≤ 4000×600×100 | B05 | T/Flat shape | 3.5 | 486 |
≤ 5000×600×125 | B05 | T/Flat shape | 3.5 | 486 |
≤ 6000×600×150 | B05 | T/Flat shape | 3.5 | 486 |
Roof and Floor panel:
Specification (mm) |
Grade | Interface | Strength grade (MPa) |
Min design load (Kn/m2) |
Measured dry density (Kg/m3) |
≤2600×600×100 | B05 | T/L shape | 3.5 | ≥1.4 | 486 |
≤3100×600×12 | B05 | T/L shape | 3.5 | ≥1.4 | 486 |
≤3700×600×150 | B05 | T/L shape | 3.5 | ≥1.4 | 486 |
≤4600×600×175 | B05 | T/L shape | 3.5 | ≥1.4 | 486 |
≤5600×600×200 | B05 | T/L shape | 3.5 | ≥1.4 | 486 |
Dongyue Machinery Group Co. Ltd. is located in the jumping-off point of Linyi City. We have brought in advanced technologies from abroad and developed series of brick machines with practicable patents by ourselves, following up the up-to-date trends abroad.
Since our establishment, we have regarded quality as the most important and eternal principle in production. Our products have passed ISO9001:2000 certification and the inspection by National Construction Machinery Products Quality Inspection Center. The new series of automatic brick forming machine features high efficiency, advanced technology, stable capability and wide applicability.
1-The Biggest AAC Block/Panel Machinery Manufacture in China
2-The Only China AAC Manufacture who Cooperates with Germany Company-AAC Concept GMBH
3-China Highest Self Own Equipment Assembly Rate of AAC Machinery-Over 85%
4- The Most Complete Systematic AAC Industrial Sector Configuration
5-The Only AAC Manufacture to Have Its Own 3 Training Centers
6-Have the Highest Market Share
7-The Only AAC Manufacture Sets Up 4 Oversea Market Office and After Sale Service Centers
8- Nine Invention Patents 31 Utility New Model Patents, Leading Enterprise in the Development of Industry Standards
9-The Most Powerful AAC Panel Application Expert In China