Ceramic bearings as an important machine parts, metal bearings because of its unmatched superior performance, high temperature, super-strength materials in the new world dominate. Over the past decade, in all areas of the national economy has been in an increasingly wide range of applications.
Product Name | ZrO2/Si3N4 R188 bearing 1/4 x 1/2 x 3/16 Inch full ceramic Ball Bearing R188 Ceramic Bearing |
Ball Material | ZrO2/Si3N4 |
Inner and Outer ring Material | ZrO2/Si3N4 |
Retainer Meterial | PTFE/PEEK |
Grade/Lever | ABEC-7 |
Features | Full ceramic bearing with magnetic resistance electric insulation, corrosion resistant, Oilless self-lubricating, high temperature cold-resistant characteristics, can be used in extreme environments and special working conditions. |
Four bearing material performances in the control condition,as follows:
Performance | Unit | GCr15 | 9Cr18 | Si3N4 | ZrO2 |
Density | g/cm3 | 7.8 | 7.9 | 3.2 | 6.0 |
Thermal expansion α | 10-6/℃ | 11 | 17 | 3.2 | 10.5 |
Elastic modulus E | GPa | 208 | 200 | 320 | 210 |
Poisson's ratio μ | 0.3 | 0.3 | 0.26 | 0.3 | |
Hardness HV | 800 | 700 | 1700 | 1300 | |
Bend bending strength δ | MPa | 2400 | 2600 | 900 | 1000 |
Compressive strength δ pressure | MPa | 2000 | 3500 | ||
Toughness Kc | Nm/cm2 | 20 | 25 | 7.0 | 11.0 |
Thermal conductivity λ | W/mk | 30-40 | 15 | 3.5 | 2.5 |
Specific resistance Ω | mm2/m | 1 | 0.75 | 1018 | 1015 |
Specific heat | J/KgK | 450 | 450 | 800 | 400 |
Operating temperature | .℃ | 120 | 150 | 1000 | 800 |
preservative | No | Week | Strong | Strong | |
Stress cycles (50% probability of damage) | 10x106 | 10x106 | 50x106 | 50x106 | |
Flow contact fatigue failure form | Peel | Peel | Peel | Peel/Tear | |
Magnetic | Yes | Yes | No | No | |
Dimensional stability | Poor | Poor | Good | Good | |
Insulation | No insulation | No insulation | Insulation | Insulation |
Ceramic bearing can be applied to high speed, high temperature, low temperature, strong corrosion, strong magnetic field, vacuum and high pressure such as all kinds of bad working condition.
1) high bearing capacity, ceramic material hardness up to 2 times the size of bearing steel, elastic modulus is 1.5 times that of the bearing steel.
2) good heat resistance, the decrease of strength of ceramic materials at high temperature is very small, even at 800 degrees Celsius remained has high strength and mechanical properties, and ceramic material the inflation rate is only 22% of bearing steel.
3) high limit speed, ceramic ball bearings work of rotational speed can reach the same bearing steel bearing limit of more than 1.3 times. 4) low friction temperature, ceramic ball bearings under the speed of 18000 r/min temperature rise is approximately the same conditions in the operation of bearing steel bearing temperature rise 60%.
4) small friction loss, bearing the same model, the quality of the ceramic material is smaller than steel, rolling body during operation by centrifugal force and gyroscopic moment of small, small spin slide.
5) High durability, ceramic materials, high hardness, excellent wear resistance, the working life of the ceramic ball bearing is generally 2 times more than ordinary bearing steel bearing.
6) Good corrosion resistance, ceramic materials can resist hydrochloric acid, sulfuric acid, nitric acid, caustic soda and other kinds of inorganic acid, organic acid, salt, alkali and corrosion of molten metal.
7) Good insulation, low permeability, almost for insulator, permeability is far less than 0.1 H, suitable for any non magnetic parts.
8) The self-lubricating self-lubrication, ceramic bearing is achieved.
ShanDong SWD International Trade Co.,Limited is a professional bearing supplier.
We are importing and exporting original bearing from Sweden,Germany,America,Japan etc.
We has professional technology and rich experience in quality contronl,customs clearance,commodity inspection,cargo transposition,insurance we has a rich inventory and is able to provide long-term stable supply,including rapid and urgent cargo handing.
With companies in Europe,America,Japan and Korea,we are an integrated supplier of spare parts,marketing all over the world.As well as this,we are procurement agents for foreign companies working in Chian.
A:We are a factory. Our factory located in Liaocheng City,Shandong province and our international department is in Jinan.
A: You can come to jinan city By train or by plane and we will pick you up at Jinan Railway Station or Jinan Yaoqiang Airport
All our clients, both domestic and abroad are warmly welcome!
A: We are honored to offer you samples. we will send to you by express, tell me your account of express if they are available
A:Quality is priority. Baisite people always attach great importance to quality controlling from the very beginning to the very end.