Zirconia Ceramic bead for Shot blast cleaning
Ceramic Beads have very fine microstructure featured strong mechanical resistance and high toughness, chemically inert, low-dust emission, do not contaminate the treated surface, especially suited for tool cleaning and surface preparation applications.
Cearmic beads have Higher density than glass beads and thus a better treatement efficiency and Lower density than steel shot, which allows to save energy and preserve work parts.
They're stable with high finishing efficiency and low abrasion to equipment.The treated surface of parts is smooth,uniform and even without contamination.They are widely used for gentle cleaning, descaling, deburring, smoothing, dulling, surface-finishing, hardening, shot peening etc.
| Physical & Chemical Index | |
|
True Specific Gravity
|
3.86
|
|
Bulk Density
|
2.35 g/cm3
|
|
Compressive Strength
|
710N
|
|
Mohs Hardness
|
7.2
|
|
ZrO2
|
68%(+/-3%)
|
|
SiO2
|
32%(+/-3%)
|
|
Available sizes for shot blasting |
|
|
Grit No. |
Diameter (mm) |
|
B-20 |
0.600-0.850 |
|
B-30 |
0.425--0.600 |
|
B-40 |
0.250--0.425 |
|
B-60 |
0.125--0.250 |
|
B-80 |
0.180-0.250 |
|
B-100 |
0.125-0.180 |
|
B-120 |
0.063--0.125 |
|
B-125 |
0.000--0.125 |
|
B-170 |
0.045-0.090 |
|
B-205 |
0.000--0.063 |
|
B-400 |
0.030-0.063 |
|
B-505 |
0.000-0.040 |
|
Available sizes for shot penning |
|
|
Grit No. |
Diameter (mm) |
|
Z-850 |
0.850—1.180 |
|
Z-600 |
0.600—0.850 |
|
Z-425 |
0.425—0.600 |
|
Z-300 |
0.300--0.425 |
|
Z-210 |
0.210—0.300 |
|
Z-150 |
0.150—0.210 |
|
Z-100 |
0.100—0.150 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier