Zhong Yun CL500 Automatic Water Leak Detection Device

Introduction Of PQWT-CL500 Automatic Pipe Leak Detection Device

PQWT-CL500 automatic pipe leak detector is a leak detection instrument with excellent performance. It has superior anti-jamming and data processing capabilities. It is widely used in leak detection of outdoor underground water pipelines, leak detection of sewage pipelines, leak detection of heating pipelines, and gas. Pipeline leak detection and so on can make your work easier.

Features Of PQWT-CL500 Automatic Pipe Leak Detection Device

1, the use of foreign digital signal processing chip and digital filter chip, the controller integrated 16M cache, the reaction is more sensitive. In particular, it is able to filter environmental noise disturbances, identify leaking noise, and allow operators to more quickly lock water leaks.

2, using 7-inch high-definition digital touch color LCD screen resolution of 800 * 480, can provide 12 display paging, can be more clearly and intuitively display the measured parameters, and full touch screen design, simple operation.

3. With a frequency range of 1 to 8000 Hz (spectrum analysis), the distribution of noise signals at various frequencies can be displayed in real time.

4. Automatically draw a continuous noise curve (point measurement) within a certain period of time, so that the determination of the leakage point position is faster.

5, the sensor built-in preamplifier circuit, the use of rubber ring seal and buffer, and the application of professional acoustic methods, making the ability to capture noise is higher than similar products.

6, using a new noise detection component, clear sound quality.

7, can maintain long-term recording, the number of recording segments is not limited, shutdown is not lost, ready to analyze.

8, the use of large-capacity battery, can work for about ten hours, and can remove the charge and on-line charging, convenient and quick.

9, anti-interference circuit design, the digital signal and analog signal were effectively isolated, eliminating the noise generated by the digital circuit.

Product Specifications Of PQWT-CL500 Pipe Leak Detection Device

First, frequency binning: 31 center frequencies and common frequency bands

Second, audio amplification gain: 100dB adjustable

Third, the frequency range: 1 ~ 8000Hz

Fourth, work mode:

 1) Spectrum Analysis Mode (Real-time display of noise signals in the range of 1 to 8000 Hz)

 2) Filter analysis mode (noise signal real-time display of each frequency band)

 3) Fine measurement mode (noise signal small value memory display)

 4) Spot mode (5, 10, 15, 20, 25, 30 minute time - noise signal curve)

Five, 7-inch high-definition digital touch color LCD screen

Six, have a long time recording and storage, playback, shutdown is not lost, can be deleted and repeated recording

Seven, 3.7V4000mAH rechargeable lithium battery two

Eight, 8.4V external smart charger

Nine, working temperature: -10 °C ~ +50 °C

Ten, save the temperature: -10 °C ~ +50 °C

Eleventh, size (length * width * height): Outside the box 47.5cm * 35.5cm * 18cm host 24cm * 16cm * 5cm

Twelve, weight: 8.7kg

Photos Of PQWT-CL500 Pipe Leak Detection Device