Zhaga Receptacle Compliant 0-10V and DALI Dimming Zhaga Controller Standard Interface
| Model | JL-700 | |||||
| Body Dimensions (mm) | Φ30*29.4 | |||||
| Protection Cap Dimensions (mm) | Φ45.2*10.8 | |||||
| Gasket Dimensions (mm) | 36.8*2.5 | |||||
| Lock Nut Material | Zinc alloy | |||||
| Gasket Material | PBT+phenolic | |||||
| Body Protection | PBT | |||||
| IP Rating | a base with dome to reach IP66 | |||||
| IK09 Capable Test | Pass | |||||
| Can Add configure Connector | Dali 2.0 / 0-10 dimming | |||||
| Application | 1.Outdoor Luminaires - Wall Packs - Parking Lots - Walkway. 2.Street and Area Lighting 3.photocell control |
|||||
|
Lead Definition Pin 1 (brown): 24VDC
Pin 2 (gray): DALI-/GND
Pin 3 (blue): DALI+
Pin 4 (black): reserved I/0 port |
 |
|
Model |
JL-710 |
|
Zhaga Input Parameter |
|
|
Rated voltage range |
100-277VAC |
|
Rated Voltage Range(Max) |
85-305VAC |
|
Maximum steady-state input AC current |
30mA (under 220VAC) |
|
I2t |
0.009A2s (under 220VAC) |
|
Conversion efficiency |
80%(under 220VAC) |
|
Zhaga Output Parameter |
|
|
Output voltage |
24V DC |
|
Stable voltage adjust precision |
+/-2% |
|
Rated current |
0.21A |
|
Rated power |
5W |
|
Noise |
150 mVp-p |
|
Ripple |
100 mVp-p |
|
Linear adjustment rate |
+/-0.12% |
|
Load adjustment rate |
+/-5% |
|
Po |
<0.12W |
|
Features: • Comply with ZHAGA BOOK18 standard • IP66 (cooperate with our ZHAGA light controller) • Support top surface installation/side installation/upside-down installation • Small size, suitable for installation on all kinds of lamps • The cost is much lower than choosing a dimming driver solution with secondary voltage output • AC wide voltage input (85~305VAC) • No-load power consumption ≤0.12W • Comprehensive protection: overvoltage protection/undervoltage protection/overcurrent protection/short circuit protection/ Open circuit protection/over temperature protection • 0~10V dimming signal switch output • CLASS II power supply • Passed RoHs and UL certification |
|
• The default line length is 152.4mm, and the length can be customized • The stripping length is 10mm by default, the insulation layer is reserved, and the length can be customized • AC wire gauge (black wire, white wire): 18AWG /AWM1015, 2.9mm outside diameter including insulation • Signal wire gauge (purple wire, gray wire): 20AWG/AWM1015, 2.6mm outside diameter including insulation |
|
The size of the opening is exactly
the same as the standard NEMA
socket, and the lamp with the
opening of the NEMA socket can
also be installed directly JL-710
socket. |
 |
| Note: Compared with the NEMA standard light controller, the ZHAGA light controller has a flexible installation position and a smaller volume, which makes the lamp more beautiful. The installation position also reflects the different functions of the ZHAGA light controller. (Light control, microwave, infrared) |
| Note:In this project case, the combination of zhaga socket and protect cover/ shorting cap can be equivalent to the pre-installation project of NEMA standard smart street light. Retrofit and upgrade traditional street lights.Compared with the street lamp project of the NEMA socket, the zhaga socket has a more beautiful design and saves costs. |
| Note: We provide different sizes of zhaga light control covers and bases for you to design your own controller. |
| Note: This zhaga light control has the same function as the traditional nema street light controller. It controls the switch of the street light through the brightness of the ambient light and reduces the cost. |
| Note: This zhaga product design is mainly applied to the principle of infrared micro- wave induction. Through infrared induction of moving objects (cars or people in mo- tion), street light switches are controlled, which not only satisfies lighting needs but also saves electricity costs. |
| Note: This series of light controller products are based on the ZHAGA BOOK18 inter-face standard development of smart Hui type rotary lock light controller, adopts light sensor + microwave mobile combined sensor, can output DALI Dimming signal. The light controller is suitable for roads, lawns, courtyards, parks, parking lots, industrial Lighting scenes such as mines. |
| Note: In this project case combination, choose the zhaga socket to match the zhaga series finished light control. According to the needs of the actual project, choose the nature of the controller (light control, smart or infrared control) to choose the right product. Compared with light control and intelligent control, infrared control is generally suitable for indoors, such as large factories and underground garages. Or it can be combined with intelligent light control to realize the intelligentization of urban lighting. |
| Note:The zhaga series of light control products are suitable for roads, lawns, court- yards, parks and other scenes. When the zhaga series products with microwave ind- uction are used more widely, in addition to outdoor lighting areas, including indoor factory areas, garages, offices, corridors and other areas. . Compared with nema standard controllers, zhaga will be combined with smart homes in the future with its compact size and microwave induction function. |
1. For more than 20 years, Shanghai Long-join Intelligent Technology Co., Ltd. focuses on processing and manufacturing and intelligent street lighting controller accessories.
2. Long-join brand reached a long-term cooperative relationship with a famous foreign brand technical lighting solution provider. Such as Home-depot, Amazon, Selc Ireland Limited, CORADIR S.A. LLC, etc.
3. Compare with TE, Amazon, home-depot, more low price, more best quality, higher waterproof, and provide professional sell-after service. 4. Get the global EU zhaga book 18 certifications in 2019, and actively joined the zhaga alliance association. referable look for the website: zhagastandard.org/products.
5. There is a number of other country market certification qualifications. such as UL,CE,RoHS,CB,FCC, and zhaga boo18, etc.
6. We can recommend different enclosure heights, and other colors of enclosures to meet the height of the smart wireless street light controller PCB board.
7. Provide 24-hour after-sales professional consulting services to help you solve related product use and installation problems. Such as JL-241J base and PCB board installation, whether the color of the cover will affect the light control effect, and so on.
You can customize the NEMA series light controller accessories, and also customize the controller PCB panel. further, you can customize the zhaga series light controller accessories. Because we are an integrated company of industry and trade, we are dealing with overseas customized processing orders on time.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier