ZONHOW Plastic Moisture Meter Moisture Analyzer

  Moisture Meter Infrared Grain Moisture Analyzer

Introduction:

Halogen moisture meter is the most advanced new type of rapid moisture meter for plastics, which is researched and developed in the production control, injection molding and molding process due to the crack, foaming, shrinkage and other problems caused by the high water content of raw materials.

Summary : 

At present, it has been extensively applied to produce various raw materials, semi-finished products and finished products in the plastic industry; for example, polyethylene (PE), polypropylene (PP), polrvinyl chloride(PVC), polystyrene (PS), ABS resin (acrylonitrile-butadiene-styrene copolymer), polyamide (PA)(called nylon usually), makrolon (PC), polyformaldehyde (POM), modified polyphenylene oxide, thermoplasticity (PET), polyphenylene sulfide (PPS), liquid crystal polymer LCP, polyether-ether-ketone (PEEL), polyether ketone (PEK), polyether sulfone (PES), PETG, engineering plastics – polysulfone (PSF), particles, auxiliaries, master batch, wooden plastic and wood flour and so on.

Features:

• 1.Exclusive software and micro-printer with standard configuration
• 2.Stand-by operation of particle and powder 
• 3.Germany advanced technology is introduced in the weighing system so as to avoid instability and easy aging of domestic magnetic sensor.
• 4.The heating system applies halogen heat device with humane operation so that experimenters can operate it without special training.
• 5.Based on the advanced drying weight loss principle, the samples are dried rapidly by means of rapid heatin and drying, and the moisture content is obtained by directly comparing the quality changes of samples before and after drying.
• 6.It has the advantages of high precision, short time, no consumables, simple operation, and is not affected by the environment, temperature and humidity.

Parameters

 Real imagines