Yokogawa EJX530A Gauge Pressure Transmitter Model EJX530A-EBS4N-017DL/KU22/X2/D3/C3/T06
Yokogawa EJX530A Gauge Pressure Transmitter Model EJX530A-EBS4N-017DL/KU22/X2/D3/C3/T06
The EJX range of transmitters is Yokogawa’s premium performance line of DPharp pressure transmitters. Released in 2004, it offers the most technologically advanced solution with class-leading performance and stability specifications. Additionally, the EJX family offers unique features such as standard IEC61508 certification, optional contact output, advanced diagnostics, multivariable mass flow measurement and ISA100 wireless capability.
2. EJX510A and EJX530A output a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response, remote setup and monitoring via BRAIN or HART communications, diagnostics, and optional status output for pressure high/low alarm.
3. The multisensing technology provides the advanced diagnostic function to detect such abnormalities as an impulse line blockage or heat trace breakage. FOUNDATION Fieldbus and PROFIBUS PA protocol types are also available.
4. All EJX series models in their standard configuration, with the exception of the Fieldbus and PROFIBUS types, are certified by TÜV as complying with SIL 2 for safety requirement.
Specifications
| EJX510A and 530A (Measurement values below are in absolute for EJX510A) | |||||
| A Capsule | B Capsule | C Capsule | D Capsule | ||
| Range | EJX510A | 0 to 200 kPa (0 to 29 psi) | 0 to 2 MPa (0 to 290 psi) | 0 to 10 MPa (0 to 1450 psi) | 0 to 50 MPa (0 to 7200 psi) |
| EJX530A | -100 to 200 kPa (-14.5 to 29 psi) | -0.1 to 2 MPa (-14.5 to 290 psi) | -0.1 to 10 MPa (-14.5 to 1450 psi) | -0.1 to 50 MPa (-14.5 to 7200 psi) | |
| Span | 8 to 200 kPa (1.16 to 29 psi) | 0.04 to 2 MPa (5.8 to 290 psi) | 0.2 to 10 MPa (29 to 1450 psi) | 1 to 50 MPa (145 to 7200 psi) | |
| Accuracy | ±0.1% | ±0.1% | ±0.1% | ±0.1% | |
| Degrees of protection | IP67, NEMA 4X and JIS C0920 immersion proof | ||||
| Certificates | FM, CENELEC ATEX, CSA, IECEx | ||||
| Output | 4 to 20 mA DC or FOUNDATION™ fieldbus, 2-wire system with digital communication | ||||
| Supply voltage | BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) Fieldbus:9 to 32 V DC (9 to 24 V DC for Entity and 9 to 17.5 V DC for FISCO) | ||||
| Ambient temperature | -40 to 85 deg C (-40 to 185 deg F) (general use type) -30 to 80 deg C (-22 to 176 deg F) (with integral indicator) | ||||
| Process temperature | -40 to 120 deg C (-40 to 248 deg F) (general use type) | ||||
| Maximum overpressure | 4 MPa (580 psi) | 4 MPa (580 psi) | 20 MPa (2900 psi) | 75 MPa (10800 psi) | |
| Mounting | Direct mounting/2-inch pipe mounting | ||||
| Wetted parts material | Capsule | Hastelloy C-276 | |||
| Process connection | 316L SST, Hastelloy C-276 | ||||
| Housing | Cast aluminum alloy or ASTM CF-8M stainless steel (optional) | ||||
Selection Table
| *Note: Large size font is recomended for viewing. |
| Model | Application | Type | Capsule | Measurement Span | Maximum Working Pressure | |||
| kPa | inH2O | MPa | psi | |||||
EJX110A | Differential Pressure | Traditional- Mounting*1 | F M H V | 0.1 to 5 0.5 to 100 2.5 to 500 0.07 to 14MPa | 0.4 to 20 2 to 400 10 to 2000 10 to 2000 psi | 16 25 25 25 | 2300 3600 3600 3600 | |
EJX115A | Flow | Integral Orifice | F M H | 1 to 5 2 to 100 20 to 210 | 4 to 20 8 to 400 80 to 830 | 16 16 16 | 2300 2300 2300 | |
EJX118A | Differential Pressure & Liquid Level with Remote Seals | Extended Flush Combination | M H | 2 to 100 10 to 500 | 8 to 400 40 to 2000 | Based on Flange Rating | ||
EJX120A | Draft Range | Traditional- Mounting*1 | E | 0.025 to 1 | 0.1 to 4 | 50 kPa | 7.25 | |
EJX130A | Differential Pressure & Liquid Level | Traditional- Mounting*1 | M H | 1 to 100 5 to 500 | 4 to 400 20 to 2000 | 32 32 | 4500 4500 | |
EJX210A | Liquid Level, (Closed or Open Tank) | Flush Extended | M H | 1 to 100 5 to 500 | 4 to 400 20 to 2000 | Based on Flange Rating | ||
EJX310A | Absolute (Vacuum) Pressure*2 | Traditional- Mounting*1 | L M A B | 0.5 to 10 1.3 to 130 0.0175 to 3.5 MPa 0.08 to 16 MPa | 0.15 to 2.95 inHg 0.39 to 38 inHg 2.5 to 500 psi 12 to 2300 psi | 10 kPa 130 kPa 3.5 16 | 2.95 inHg 38 inHg 500 2300 | |
EJX430A | Gauge Pressure | Traditional- Mounting*1 | H A B | 2.5 to 500 0.0175 to 3.5 MPa 0.08 to 16 MPa | 10 to 2000 2.5 to 500 psi 12 to 2300 psi | 500 kPa 3.5 16 | 2000 inH2O 500 2300 | |
EJX438A | Gauge Pressure with Remote Seal | Flush | A B | 0.035 to 3.5 MPa 0.16 to 16 MPa | 5 to 500 psi 23 to 2300 psi | Based on Flange Rating | ||
| Extended | A B | 0.06 to 3 MPa 0.46 to 7 MPa | 8.6 to 430 psi 66 to 1000 psi | |||||
EJX440A | High Gauge | Traditional- Mounting*1 | C D | 0.25 to 32 MPa 0.25 to 50 MPa | 36 to 4500 psi 36 to 7200 psi | 32 50 | 4500 7200 | |
EJX510A EJX530A | Absolute & Gauge Pressure*2 | Direct- Mounting | A B C D | 8 to 200 0.04 to 2 MPa 0.2 to 10 MPa 1 to 50 MPa | 1.16 to 29 psi 5.8 to 290 psi 29 to 1450 psi 145 to 7200 psi | 200 kPa 2 10 50 | 29 290 1450 7200 | |
EJX610A EJX630A | A B C D | 2 to 200 0.01 to 2 MPa 0.05 to 10 MPa 0.35 to 70 MPa | 0.3 to 29 psi 1.5 to 290 psi 7.3 to 1450 psi 50.8 to 10150 psi | 200 kPa 2 10 70 | 29 290 1450 10150 | |||
EJX910A | Multi- Variable Pressure Transmitter | Traditional- Mounting*1 | L M H | 0.1 to 10 0.5 to 100 2.5 to 500 | 0.4 to 40 2 to 400 10 to 2000 | 16 25 25 | 2300 3600 3600 | |
EJX930A | M H | 1 to 100 5 to 500 | 4 to 400 20 to 2000 | 32 32 | 4500 4500 | |||
| *1: | Traditional-Mounting is 1/4NPT or Rc1/4 process connection (1/2NPT or Rc1/2 with process adapter). |
| *2: | Measurement values in Absolute for Absolute Pressure Transmitter. |
The main differences in the appearance between our genuine Yokogawa EJA transmitters and the counterfeit
Here are the main differences between our genuine Yokogawa EJA transmitters and the counterfeit that has already been found FYI.
1) The color is different in the Liquid Crystal Display (LCD). The trademark [YOKOGAWA] above the LCD is different.
Our genuine products: Light Gray with [YOKOGAWA] trademark above it.
Counterfeit: Dark blue without [YOKOGAWA] trademark above it.
(Picture 1)
(Picture 2)
LCD circuit board
(Picture 3)
The state of the open machine cover
The number of screw hole Connected to the main case is different
Our genuine products: Four holes around
Counterfeit: Two holes around
(Picture 4)
Besides, the differences are also found in the circuit structure and principle of measurement etc.
Why do you choose us?
1. 100% original yokogawa product, 100% quality assurance.
If you find a fake yokogawa. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
2. Varied payment methods.
We adopt L/C, D/A, D/P, T/T, and other methods. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
Contact:
Wuhan Xieyuan Automation Equipment Co., Ltd
Telephone:86-027-85581877
Mobile Phone:86-15602323637
Fax:86-027-85309780
Skype:ava.huang4
Address:7-A16,Caishen Commercial Plaza,Hankou Railway Station
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier